|
MSP430F15X Datasheet, PDF (42/77 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER | |||
|
◁ |
MSP430F15x, MSP430F16x, MSP430F161x
MIXED SIGNAL MICROCONTROLLER
SLAS368G â OCTOBER 2002 â REVISED MARCH 2011
electrical characteristics over recommended operating free-air temperature (unless otherwise
noted) (continued)
12-bit ADC, timing parameters
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
fADC12CLK
For specified performance of ADC12
linearity parameters
2.2V/3 V
0.45
5
6.3 MHz
fADC12OSC
tCONVERT
tADC12ONâ¡
Internal ADC12
oscillator
Conversion time
Turn on settling time of
the ADC
ADC12DIV=0,
fADC12CLK=fADC12OSC
2.2 V/ 3 V
CVREF+ ⥠5 μF, Internal oscillator,
fADC12OSC = 3.7 MHz to 6.3 MHz
2.2 V/ 3 V
External fADC12CLK from ACLK, MCLK or SMCLK:
ADC12SSEL â 0
(see Note 1)
3.7
5
2.06
13ÃADC12DIVÃ
1/fADC12CLK
6.3 MHz
3.51 μs
μs
100 ns
RS = 400 Ω, RI = 1000 Ω,
3V
1220
tSampleâ¡
Sampling time
CI = 30 pF
ns
Ï = [RS + RI] x CI;(see Note 2)
2.2 V
1400
â Not production tested, limits characterized
â¡ Not production tested, limits verified by design
NOTES: 1. The condition is that the error in a conversion started after tADC12ON is less than ±0.5 LSB. The reference and input signal are already
settled.
2. Approximately ten Tau (Ï) are needed to get an error of less than ±0.5 LSB:
tSample = ln(2n+1) x (RS + RI) x CI+ 800 ns where n = ADC resolution = 12, RS = external source resistance.
12-bit ADC, linearity parameters
PARAMETER
TEST CONDITIONS
1.4 V ⤠(VeREF+ â VREFâ/VeREFâ) min ⤠1.6 V
EI
Integral linearity error
1.6 V < (VeREF+ â VREFâ/VeREFâ) min ⤠[VAVCC]
ED
Differential linearity
error
(VeREF+ â VREFâ/VeREFâ)min ⤠(VeREF+ â VREFâ/VeREFâ),
CVREF+ = 10 μF (tantalum) and 100 nF (ceramic)
EO Offset error
EG Gain error
(VeREF+ â VREFâ/VeREFâ)min ⤠(VeREF+ â VREFâ/VeREFâ),
Internal impedance of source RS < 100 Ω,
CVREF+ = 10 μF (tantalum) and 100 nF (ceramic)
(VeREF+ â VREFâ/VeREFâ)min ⤠(VeREF+ â VREFâ/VeREFâ),
CVREF+ = 10 μF (tantalum) and 100 nF (ceramic)
ET
Total unadjusted
error
(VeREF+ â VREFâ/VeREFâ)min ⤠(VeREF+ â VREFâ/VeREFâ),
CVREF+ = 10 μF (tantalum) and 100 nF (ceramic)
2.2 V/3 V
2.2 V/3 V
MIN TYP
MAX
±2
±1.7
UNIT
LSB
±1 LSB
2.2 V/3 V
±2 ±4 LSB
2.2 V/3 V
2.2 V/3 V
±1.1 ±2 LSB
±2 ±5 LSB
42
⢠POST OFFICE BOX 655303 DALLAS, TEXAS 75265
|
▷ |