TL750L Datasheet, PDF (4/19 Pages) Texas Instruments – LOW-DROPOUT VOLTAGE REGULATORS

TL750L, TL751L SERIES
LOW-DROPOUT VOLTAGE REGULATORS
SLVS017S – SEPTEMBER 1987 – REVISED AUGUST 2005
TL75xL05 Electrical Characteristics⁽¹⁾
V_I = 14 V, I_O = 10 mA, T_J = 25°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Output voltage
Input regulation voltage
Ripple rejection
Output regulation voltage
Dropout voltage
Output noise voltage
Input bias current
V_I = 6 V to 26 V, I_O = 0 to 150 mA
V_I = 9 V to 16 V
V_I = 6 V to 26 V
V_I = 8 V to 18 V, f = 120 Hz
I_O = 5 mA to 150 mA
I_O = 10 mA
I_O = 150 mA
f = 10 Hz to 100 kHz
T_J = 25°C
T_J = 0°C to 125°C
I_O = 150 mA
V_I = 6 V to 26 V, I_O = 10 mA, T_J = 0°C to 125°C
ENABLE ≥ 2 V
www.ti.com
TL750L05
TL751L05
MIN
TYP
4.8
5
4.75
5
6
60
65
20
500
10
1
MAX
5.2
5.25
10
30
50
0.2
0.6
12
2
0.5
UNIT
V
mV
dB
mV
V
µV
mA
(1) Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects
must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 10-µF capacitor,
with equivalent series resistance of less than 0.4 Ω, across the output.
TL75xL08 Electrical Characteristics⁽¹⁾
V_I = 14 V, I_O = 10 mA, T_J = 25°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Output voltage
Input regulation voltage
Ripple rejection
Output regulation voltage
Dropout voltage
Output noise voltage
Input bias current
V_I = 9 V to 26 V, I_O = 0 to 150 mA
V_I = 10 V to 17 V
V_I = 9 V to 26 V
V_I = 11 V to 21 V, f = 120 Hz
I_O = 5 mA to 150 mA
I_O = 10 mA
I_O = 150 mA
f = 10 Hz to 100 kHz
T_J = 25°C
T_J = 0°C to 125°C
I_O = 150 mA
V_I = 9 V to 26 V, I_O = 10 mA, T_J = 0°C to 125°C
ENABLE ≥ 2 V
TL750L08
TL751L08
MIN
TYP
7.68
8
7.6
10
25
60
65
40
500
10
1
MAX
8.32
8.4
20
50
80
0.2
0.6
12
2
0.5
UNIT
V
mV
dB
mV
V
µV
mA
(1) Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects
must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 10-µF capacitor,
with equivalent series resistance of less than 0.4 Ω, across the output.
4