TL5632C Datasheet, PDF (4/9 Pages) Texas Instruments – 8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER

TL5632C
8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER
SLAS091 – DECEMBER 1994
recommended operating conditions
Supply voltage, AVCC, DVCC
High-level input voltage, VIH
Low-level input voltage, VIL
Reference voltage, Vref (see Note 1)
Setup time, data before CLK↑, tsu1
Hold time, data after CLK↑, th1
Pulse duration at high level, tw1
Pulse duration at low level, tw2
External phase compensation capacitance, CCOMP
Operating free-air temperature, TA
NOTE 1: VCC – Vref ≤ 1.2 V
MIN NOM MAX UNIT
4.75
5 5.25 V
2
V
0.8 V
3.8
4 4.2 V
10
ns
3
ns
8.3
ns
8.3
ns
1
µF
0
70 °C
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
PARAMETER
Resolution
TEST CONDITIONS
MIN TYP† MAX
8
UNIT
Bit
IIH
High-level input current
IIL
Low-level input current
Iref
Reference input current
Vref
Reference output voltage
VFS
Full-scale analog output voltage
VZS
Zero-scale analog output voltage
RGB full-scale ratio
VCC = 5.25 V,
VCC = 5.25 V,
REF IN = 4 V
VIH = 2.7 V
VIH = 2.7 V
– 400
20
µA
µA
10
µA
VCC = 5 V, With internal reference
3.8
4
4.2
V
VIH = 2 V,
REF IN = 4 V
AVCC – 15 AVCC AVCC+ 15 mV
VIL = 0.8 V, REF IN = 4 V
3.9
3.98 4.05
V
0%
4%
8%
zo
Output impedance
ICC
Supply current
200
240
280
W
70
90
mA
operating characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP† MAX UNIT
EL
Linearity error
ED
Differential linearity error
fc
Maximum conversion rate
tPLH Propagation delay time, low-to-high level
tPHL Propagation delay time, high-to-low level
tr
Rise time
tf
Fall time
† _{All typical values are at VCC = 5 V, TA = 25°C.}
‡ _{CL includes probe and jig capacitances.}
End point, REF IN = 4 V
± 0.5 LSB
REF IN = 4 V
± 0.5 LSB
60
MHz
TA = 25°C, CL ≤ 5 pF‡
10
ns
10
5
ns
5
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265