TL5632C Datasheet, PDF (3/9 Pages) Texas Instruments – 8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER

TL5632C
8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER
SLAS091 – DECEMBER 1994
Terminal Functions
TERMINAL
I/O
NAME
NO.
B1 – B8
BOUT
CCOMP
CLKB IN
CLKG IN
CLKR IN
G1 – G8
GND
18 – 25
I
36
O
31
26
I
27
I
28
I
9 – 16
I
29, 35, 37,
39, 41
GOUT
NC
38
O
17, 44
R1 – R8
ROUT
AVCC
DVCC
REF IN
1–8
I
40
O
32, 42
30, 43
34
I
REF OUT
33
O
NOTE 1: VCC – Vref ≤ 1.2 V
DESCRIPTION
B-channel digital input (B1= MSB)
B-channel analog output
Phase compensation capacitance. A 1 µF capacitor is connected from CCOMP to GND.
B-channel clock input
G-channel clock input
R-channel clock input
G-Channel digital input (G1= MSB)
Ground. All GND terminals are connected internally; however, all GND terminals should be connected
externally to a ground plane or equivalent low impedance ground return.
G-channel analog output
No connection internally
R-channel digital input (R1= MSB)
R-channel analog output
Analog power supply voltage
Digital power supply voltage
Reference voltage input. REF IN accepts the reference voltage on REF OUT. An external reference can
also be applied consistent with Note 1.
Reference voltage output. An internal voltage divider generates the voltage level (see schematics of
outputs, page 2).
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^†
Power supply voltage range, AV_CC, DV_CC (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 7 V
Digital input voltage range,V_I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to DV_CC
Analog output voltage range, R_OUT, G_OUT, B_OUT, C_COMP (externally applied) . . . . – 0.3 V to AV_CC + 0.3 V
Reference input range, REF IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to AV_CC + 0.3 V
Reference output range, REF OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to AV_CC + 0.3 V
Operating free-air temperature range, T_A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 2: All voltage values are with respect to GND.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3