English
Language : 

SN74LVC1G98 Datasheet, PDF (4/16 Pages) Texas Instruments – CONFIGURABLE MULTIPLE-FUNCTION GATE
◁
SN74LVC1G98
CONFIGURABLE MULTIPLE-FUNCTION GATE
SCES417H – DECEMBER 2002 – REVISED JUNE 2005
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
www.ti.com
VCC Supply voltage range
VI
Input voltage range(2)
VO
Voltage range applied to any output in the high-impedance or power-off state(2)(3)
VO
Voltage range applied to any output in the high or low state
IIK
Input clamp current
VI < 0
IOK Output clamp current
VO < 0
IO
Continuous output current
Continuous current through VCC or GND
DBV package
DCK package
θJA
Package thermal impedance(4)
DRL package
YEA/YZA package
YEP/YZP package
Tstg Storage temperature range
MIN
MAX
–0.5
6.5
–0.5
6.5
–0.5
6.5
–0.5 VCC + 0.5
–50
–50
±50
±100
165
259
142
143
123
–65
150
UNIT
V
V
V
V
mA
mA
mA
mA
°C/W
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
VCC Supply voltage
VI
Input voltage
VO
Output voltage
IOH High-level output current
IOL
Low-level output current
TA
Operating free-air temperature
Operating
Data retention only
VCC = 1.65 V
VCC = 2.3 V
VCC = 3 V
VCC = 4.5 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3 V
VCC = 4.5 V
MIN
1.65
1.5
0
0
–40
MAX
5.5
5.5
VCC
–4
–8
–16
–24
–32
4
8
16
24
32
85
UNIT
V
V
V
mA
mA
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
4
 ▷