LP2951-N_15_15 Datasheet, PDF (32/50 Pages) Texas Instruments – LP295x-N Series of Adjustable Micropower Voltage Regulators

LP2950-N, LP2951-N
SNVS764O – JANUARY 2000 – REVISED DECEMBER 2014
www.ti.com
WSON Mounting (continued)
The DAP (exposed pad) on the bottom of the WSON package is connected to the die substrate with a conductive
die attach adhesive. The DAP has no direct electrical (wire) connection to any of the eight pins. There is a
parasitic PN junction between the die substrate and the device ground. As such, it is strongly recommend that
the DAP be connected directly to the ground at device lead 4 (that is, GND). Alternately, but not recommended,
the DAP may be left floating (that is, no electrical connection). The DAP must not be connected to any potential
other than ground.
32
Submit Documentation Feedback
Copyright © 2000–2014, Texas Instruments Incorporated
Product Folder Links: LP2950-N LP2951-N