TLE2082 Datasheet, PDF (3/37 Pages) Texas Instruments – EXCALIBUR HIGH-SPEED JFET-INPUT DUAL OPERATIONAL AMPLIFIERS

TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TLE2082Y chip information
This chip, when properly assembled, displays characteristics similar to the TLE2082. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(8)
(1)
(7)
(3)
1IN +
(2)
1IN –
(7)
2OUT
VCC+
(8)
+
–
+
–
(4)
VCC–
(1)
1OUT
(5)
2IN +
(6)
2IN –
90 (2)
(6)
CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 4 × 4 MINIMUM
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(3)
(4)
(5)
PIN (4) IS INTERNALLY CONNECTED
TO BACKSIDE OF THE CHIP.
80
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5–3