|
SLVA343A Datasheet, PDF (3/8 Pages) Texas Instruments – Medium Integrated Power Solution Using a Dual DC/DC Converter and an LDO | |||
|
◁ |
www.ti.com
3 Features
The design uses the following high-efficiency dc/dc converter with integrated FETs.
INPUT VOLTAGE
COMBINE RTC AND STATIC 1.2
Core 1.2 V at 600 mA
Static 1.2 V + VRTC at 251 mA
Static 1.8 V at 230 mA
Static 3.3 V at 115 mA
~3.3 V
INTEGRATION AND HIGH EFFICIENCY
(Without DVFS)
TPS62420 (DCDC1)
TPS62420 (DCDC2)
TPS71733 (DRV)
In the preceding table, VRTC is included in the STATIC12 (fixed 1.2 V) group.
TPS62420
⢠High efficiency â up to 95%
⢠VIN range From 2.5 V to 6 V
⢠Output current 600 mA and 1000 mA
⢠EasyScale⢠optional 1-pin serial interface for dynamic output voltage adjustment
⢠Power-Save mode at light-load currents
⢠Available in a 10-pin QFN (3Ã3mm)
TPS71733
⢠150-mA low-dropout (LDO) regulator with enable
⢠Low noise: 30 mV typical (100 Hz to 100 kHz)
⢠Excellent load/line transient response
⢠Small SC70-5, 2 mm à 2 mm SON-6, and 1,5 mm à 1,5 mm SON-6 packages
More information on the devices can be found in the data sheets.
⢠TPS62420, SLVS676
⢠TPS71733, SBVS068
Features
SLVA343A â June 2009 â Revised May 2010
Medium Integrated Power Solution Using a Dual DC/DC Converter and an LDO
3
Copyright © 2009â2010, Texas Instruments Incorporated
|
▷ |