LP38851S-ADJ Datasheet, PDF (3/29 Pages) Texas Instruments – LP38851 800 mA Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Start

LP38851
www.ti.com
SFM
Pin #
-
PFM
Pin #
-
SNVS492C – JUNE 2007 – REVISED APRIL 2013
PIN DESCRIPTIONS (continued)
SO PowerPad
Pin #
DAP
Pin
Symbol
DAP
Pin Description
The SO PowerPad DAP is a thermal connection only that is
physically attached to the backside of the die, and used as a
thermal heat-sink connection. See APPLICATION INFORMATION
for details.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS ⁽¹⁾
Storage Temperature Range
Lead Temperature
ESD Rating
Power Dissipation ⁽³⁾
Soldering, 5 seconds
Human Body Model ⁽²⁾
V_IN Supply Voltage (Survival)
V_BIAS Supply Voltage (Survival)
V_SS SoftStart Voltage (Survival)
V_OUT Voltage (Survival)
I_OUT Current (Survival)
Junction Temperature
−65°C to +150°C
260°C
±2 kV
Internally Limited
−0.3V to +6.0V
−0.3V to +6.0V
−0.3V to +6.0V
−0.3V to +6.0V
Internally Limited
−40°C to +150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but does not ensure specific performance limits. For specifications and conditions, see the
Electrical Characteristics.
(2) The human body model is a 100 pF capacitor discharged through a 1.5k resistor into each pin. Test method is per JESD22-A114.
(3) Device power dissipation must be de-rated based on device power dissipation (P_D), ambient temperature (T_A), and package junction to
ambient thermal resistance (θ_JA). Additional heat-sinking may be required to ensure that the device junction temperature (T_J) does not
exceed the maximum operating rating. See APPLICATION INFORMATION for details.
OPERATING RATINGS ⁽¹⁾
V_IN Supply Voltage
V_BIAS Supply Voltage
V_EN Voltage
I_OUT
Junction Temperature Range ⁽²⁾
0.8V ≤ V_OUT ≤ 1.2V
1.2V < V_OUT ≤ 1.8V
(V_OUT + V_DO) to V_BIAS
3.0V to 5.5V
4.5V to 5.5V
0.0V to V_BIAS
0 mA to 800 mA
−40°C to +125°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but does not ensure specific performance limits. For specifications and conditions, see the
Electrical Characteristics.
(2) Device power dissipation must be de-rated based on device power dissipation (P_D), ambient temperature (T_A), and package junction to
ambient thermal resistance (θ_JA). Additional heat-sinking may be required to ensure that the device junction temperature (T_J) does not
exceed the maximum operating rating. See APPLICATION INFORMATION for details.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: LP38851
Submit Documentation Feedback
3