JM38510-10304BGA Datasheet, PDF (3/22 Pages) Texas Instruments – LM111JAN Voltage Comparator

LM111JAN
www.ti.com
SNOSAM9B – JULY 2008 – REVISED MARCH 2013
Absolute Maximum Ratings⁽¹⁾
Positive Supply Voltage
Negative Supply Voltage
Total Supply Voltage
Output to Negative Supply Voltage
GND to Negative Supply Voltage
Differential Input Voltage
Sink Current
Input Voltage⁽²⁾
Power Dissipation⁽³⁾
Output Short Circuit Duration
Maximum Strobe Current
Operating Temperature Range
Thermal Resistance
θ_JA
θ_JC
Storage Temperature Range
Maximum Junction Temperature
Lead Temperature (Soldering, 60 seconds)
Voltage at Strobe Pin
Package Weight (Typical)
ESD Rating⁽⁴⁾
8 LD CERDIP
8 LD Metal Can
10 LD CERPACK
10 LD Ceramic SOIC
14 LD CERDIP
8 LD CERDIP (Still Air @ 0.5W)
8 LD CERDIP (500LF/Min Air flow @ 0.5W)
8 LD Metal Can (Still Air @ 0.5W)
8 LD Metal Can (500LF/Min Air flow @ 0.5W)
10 Ceramic SOIC (Still Air @ 0.5W)
10 Ceramic SOIC (500LF/Min Air flow @ 0.5W)
10 CERPACK (Still Air @ 0.5W)
10 CERPACK (500LF/Min Air flow @ 0.5W)
14 LD CERDIP (Still Air @ 0.5W)
14 LD CERDIP (500LF/Min Air flow @ 0.5W)
8 LD CERDIP
8 LD Metal Can Pkg
10 LD Ceramic SOIC
10 LD CERPACK
14 LD CERDIP
8 LD Metal Can
8 LD CERDIP
10 LD CERPACK
10 LD Ceramic SOIC
14 LD CERDIP
+30.0V
-30.0V
36V
50V
30V
±30V
50mA
±15V
400mW @ 25°C
330mW @ 25°C
330mW @ 25°C
330mW @ 25°C
400mW @ 25°C
10 seconds
10mA
-55°C ≤ T_A ≤ 125°C
120°C/W
76°C/W
150°C/W
92°C/W
231°C/W
153°C/W
231°C/W
153°C/W
120°C/W
65°C/W
35°C/W
40°C/W
60°C/W
60°C/W
35°C/W
-65°C ≤ T_A ≤ 150°C
175°C
300°C
V⁺ -5V
965mg
1100mg
250mg
225mg
TBD
300V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(2) This rating applies for ±15V supplies. The positive input voltage limit is 30 V above the negative supply. The negative input voltage limit
is equal to the negative supply voltage or 30V below the positive supply, whichever is less.
(3) The maximum power dissipation must be derated at elevated temperatures and is dictated by T_Jmax (maximum junction temperature),
θ_JA (package junction to ambient thermal resistance), and T_A (ambient temperature). The maximum allowable power dissipation at any
temperature is P_Dmax = (T_Jmax - T_A)/θ_JA or the number given in the Absolute Maximum Ratings, whichever is lower.
(4) Human body model, 1.5 kΩ in series with 100 pF.
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM111JAN
Submit Documentation Feedback
3