English
Language : 

DS14C335MSAX Datasheet, PDF (3/16 Pages) Texas Instruments – DS14C335 3.3V Supply TIA/EIA-232 3 x 5 Driver/Receiver
DS14C335
www.ti.com
SNLS090C – MARCH 2000 – REVISED APRIL 2013
Absolute Maximum Ratings(1)(2)
Supply Voltage (VCC)
V+ Pin
V− Pin
Input Voltage (DIN, SD)
Driver Output Voltage
Receiver Input Voltage
Receiver Output Voltage
Junction Temperature
Storage Temperature Range
Lead Temperature (Soldering 4 sec.)
Short Circuit Duration (DOUT)
Maximum Package Power Dissipation @
+25°C
ESD Rating (HBM, 1.5 kΩ, 100 pF)
SSOP DB Package
Derate DB Package 10.3 mW/°C above +25°C
−0.3V to + 6V
(VCC−0.3V) to +14V
+0.3V to −14V
−0.3V to + 5.5V
(V+ + 0.3V) to (V− −0.3V)
±25V
−0.3V to (VCC+ 0.3V)
+150°C
−65°C to +150°C
+260°C
continuous
1286 mW
≥ 2.0 kV
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the devices should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions
Supply Voltage (VCC)
DC-DC Converter Capacitors (C1–C5)
Operating Free Air Temperature (TA)
DS14C335
Min
Max
Units
3.0
3.6
V
0.47
μF
0
+70
°C
Electrical Characteristics(1)(2)
Over recommended operating conditions, SD = 0.8V, unless otherwise specified.
Symbol
Parameter
Conditions
DEVICE CHARACTERISTICS
V+
Positive Power Supply
No Load
DIN = 0.8V
V−
Negative Power Supply
C1–C5 = 0.47 μF
DIN = 2.0V
ICC
Supply Current
No Load
ICX
SHUTDOWN Supply Current
RL = 3 kΩ, SD = VCC, 5.5V
VIH
High Level Enable Voltage
SD
VIL
Low Level Enable Voltage
IIH
High Level Enable Current
2.0V ≤ VIN ≤ 5.5V
IIL
Low Level Enable Current
DRIVER CHARACTERISTICS(3)
GND ≤ VIN ≤ 0.8V
VIH
High Level Input Voltage
DIN
VIL
Low Level Input Voltage
IIH
High Level Input Current
2.0V ≤ VIN ≤ 5.5V
IIL
Low Level Input Current
GND ≤ VIN ≤ 0.8V
VOH
High Level Output Voltage
RL = 3 kΩ
VOL
Low Level Output Voltage
IOS+
Output High Short Circuit Current VO = 0V, VIN = 0.8V(4)
IOS−
Output Low Short Circuit Current VO = 0V, VIN = 2.0V(4)
Min
Typ
Max Units
+9.3
V
−9.0
V
11.5
20
mA
1.0
10
μA
2.0
V
GND
0.8
V
+2.0
μA
−2.0
μA
2.0
V
GND
0.8
V
+1.0
μA
−1.0
μA
+5.0 +7.1
V
−6.3 −5.0
V
−40 −16.5 −8
mA
6
12.3
40
mA
(1) Typical values are given for VCC = 3.3V and TA = +25°C.Ó
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified.
(3) Generator characteristics for driver input: f = 64 kHz (128 kbits/sec), tr = tf < 10 ns, VIH = 3V, VIL = 0V, duty cycle = 50%.
(4) Only one driver output shorted at a time.
Copyright © 2000–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS14C335