English
Language : 

DRV600 Datasheet, PDF (3/16 Pages) Texas Instruments – DIRECTPATH™ STEREO LINE DRIVER
◁
DRV600
www.ti.com
SLOS536 – JUNE 2007
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range, TA = 25°C (unless otherwise noted)
VALUE / UNIT
Supply voltage, AVDD, PVDD
–0.3 V to 5.5 V
VI
R(Load)
TA
TJ
Tstg
Input voltage
Minimum load impedance
Operating free-air temperature range
Operating junction temperature range
Storage temperature range
VSS - 0.3 V to VDD + 0.3 V
≥ 100 Ω
–40°C to 85°C
–40°C to 150°C
–65°C to 85°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
TA
–40°C to 85°C
AVAILABLE OPTIONS
PACKAGED DEVICES(1)
20-pin, 4 mm × 4 mm QFN
PART NUMBER
DRV600RTJ (2)
SYMBOL
AKQ
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
(2) The RTJ package is only available taped and reeled. To order, add the suffix “R” to the end of the part number for a reel of 3000, or add
the suffix “T” to the end of the part number for a reel of 250 (e.g., DRV600RTJR).
RECOMMENDED OPERATING CONDITIONS
VSS
Supply voltage, AVDD, PVDD
VIH
High-level input voltage
SDL, SDR
VIL
Low-level input voltage
SDL, SDR
TA
Operating free-air temperature
(1) Device can shut down for VDD > 4.5 V to prevent damage to the device.
ELECTRICAL CHARACTERISTICS
TA = 25°C (unless otherwise noted)
PARAMETER
|VOS| Output offset voltage
PSRR Power Supply Rejection Ratio
VOH High-level output voltage
VOL Low-level output voltage
|IIH| High-level input current (SDL, SDR)
|IIL| Low-level input current (SDL, SDR)
IDD
Supply Current
TEST CONDITIONS
VDD = 1.8 V to 4.5 V, Inputs grounded
VDD = 1.8 V to 4.5 V
VDD = 3.3 V, RL = 600 Ω
VDD = 3.3 V, RL = 600 Ω
VDD = 4.5 V, VI = VDD
VDD = 4.5 V, VI = 0 V
VDD = 1.8 V, No load, SDL= SDR = VDD
VDD = 3.3 V, No load, SDL = SDR = VDD
VDD = 4.5 V, No load, SDL = SDR = VDD
Shutdown mode, VDD = 1.8 V to 4.5 V
MIN
MAX UNIT
1.8
4.5 (1)
V
1.5
V
0.5
V
–40
85
°C
MIN TYP
–69 –80
3.10
5.3
6.7
8
MAX
8
–3.05
1
1
6.5
8.2
10
1
UNIT
mV
dB
V
V
µA
µA
mA
µA
3
 ▷