DRV600 Datasheet, PDF (1/16 Pages) Texas Instruments – DIRECTPATH™ STEREO LINE DRIVER

DRV600
www.ti.com
DIRECTPATH™ STEREO LINE DRIVER
SLOS536 – JUNE 2007
FEATURES
• Space Saving Package
– 20-Pin, 4 mm × 4 mm Thin QFN, Thermally
Optimized PowerPAD™ Package
• Ground-Referenced Outputs Eliminate
DC-Blocking Capacitor
– Reduce Board Area
– Reduce Component Cost
– Improve THD+N Performance
– No Degradation of Low-Frequency
Response Due to Output Capacitors
• Wide Power Supply Range: 1.8 V to 4.5 V
• 2 Vrms/Ch Output Voltage into 600 Ω at 3.3 V
• Independent Right and Left Channel
Shutdown Control
• Short-Circuit and Thermal Protection
• Pop Reduction Circuitry
APPLICATIONS
• Set-top boxes
• CD / DVD Players
• DVD-Receivers
• HTIB
• PDP / LCD TV's
DESCRIPTION
The DRV600 is a stereo line driver designed to allow the removal of the output dc-blocking capacitors for
reduced component count and cost. The DRV600 is ideal for single supply electronics where size and cost are
critical design parameters.
The DRV600 is capable of driving 2 Vrms into a 600-Ω load at 3.3 V. The DRV600 has a fixed gain of –1.5 V/V
and line outputs that has ±8-kV IEC ESD protection. The DRV600 has independent shutdown control for the
right and left audio channels.
The DRV600 is available in a 4 mm × 4 mm Thin QFN package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
DIRECTPATH, PowerPAD, DirectPath are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated