CC8520 Datasheet, PDF (3/17 Pages) Texas Instruments – 2.4 GHz RF SoC FOR WIRELESS DIGITAL AUDIO STREAMING CC8520 - PurePath™ Wireless

WWW.TI.COM
CC8520
SWRS091A – MARCH 2010
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
PARAMETER
TEST CONDITIONS
Min
Max
Unit
Supply voltage
All supply pins must have the same voltage
–0.3
3.9
V
Voltage on any digital pin
–0.3
min(VDD +
V
0.3, 3.9)
Input RF level
10
dBm
Storage temperature range
-40
85
°C
Reflow soldering temperature
ESD ⁽²⁾
According to IPC/JEDEC J-STD-020
All pads, according to human-body model
(HBM), JEDEC STD 22, method A114
260
°C
2000
V
According to charged-device model (CDM),
JEDEC STD 22, method C101E
400
V
(1) _{Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings}
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) _{CAUTION: ESD sensitive device. Precaution should be used when handing the device in order to prevent permanent damage.}
RECOMMENDED OPERATING CONDITIONS
PARAMETER
TEST CONDITIONS
Operating ambient temperature range, T_A
Operating supply voltage
Min
Max
Unit
-40
+85
°C
2.0
3.6
V
3
Copyright © 2010, Texas Instruments Incorporated