5962-9679801VCA Datasheet, PDF (3/25 Pages) Texas Instruments – LM119QML High Speed Dual Comparator

LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
Absolute Maximum Ratings ⁽¹⁾
Total Supply Voltage
Output to Negative Supply Voltage
Ground to Negative Supply Voltage
Ground to Positive Supply Voltage
Differential Input Voltage
Input Voltage ⁽²⁾
Power Dissipation ⁽³⁾
Output Short Circuit Duration
Storage Temperature Range
Operating Ambient Temperature Range
Maximum Junction Temperature (T_J)
Lead Temperature (Soldering, 10 sec.)
Thermal Resistance
θ_JA
LCCC Package (Still Air)
LCCC Package (500LF/Min Air flow)
TO-100 Package (Still Air)
TO-100 Package (500LF/Min Air flow)
CDIP Package (Still Air)
CDIP Package (500LF/Min Air flow)
CLGA Package (Still Air)
CLGA Package (500LF/Min Air flow)
CLGA Package (Still Air)
CLGA Package (500LF/Min Air flow)
θ_JC
LCCC Package
TO-100 Package
CDIP Package
CLGA Package
CLGA Package
Package Weight
LCCC Package
TO-100 Package
CDIP Package
CLGA Package
CLGA Package
ESD rating ⁽⁴⁾
36V
36V
25V
18V
±5V
±15V
500 mW
10 sec
−65°C ≤ T_A ≤ 150°C
−55°C ≤ T_A ≤ 125°C
150°C
260°C
89°C/W
63°C/W
162°C/W
88°C/W
94°C/W
52°C/W
215°C/W
132°C/W
215°C/W
132°C/W
5°C/W
31°C/W
11°C/W
13°C/W
13°C/W
TBD
TBD
TBD
TBD
225mg
800V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(2) For supply voltages less than ±15V the absolute maximum input voltage is equal to the supply voltage.
(3) The maximum power dissipation must be derated at elevated temperatures and is dictated by T_Jmax (maximum junction temperature),
θ_JA (package junction to ambient thermal resistance), and T_A (ambient temperature). The maximum allowable power dissipation at any
temperature is P_Dmax = (T_Jmax - T_A)/θ_JA or the number given in the Absolute Maximum Ratings, whichever is lower.
(4) Human Body model, 1.5KΩ in series with 100pF.
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
Submit Documentation Feedback
3