5962-7802301Q2A Datasheet, PDF (3/22 Pages) Texas Instruments – QUADRUPLE DIFFERENTIAL LINE DRIVER

www.ti.com
V
9Ω
Output Y
AM26LS31C, AM26LS31M
QUADRUPLE DIFFERENTIAL LINE DRIVER
SLLS114I – JANUARY 1979 – REVISED FEBRUARY 2006
SCHEMATIC (EACH DRIVER)
Input A
22 kΩ
9Ω
Output Z
Common to All Four Drivers
V_CC
V
22 kΩ
22 kΩ
Enable G
Enable G
To Three Other Drivers
GND
All resistor values are nominal.
Absolute Maximum Ratings⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
V_CC
Supply voltage⁽²⁾
V_I
Input voltage
Output off-state voltage
θ_JA
Package thermal impedance⁽³⁾
Lead temperature 1,6 mm (1/16 in) from case for 10 s
Lead temperature 1,6 mm (1/16 in) from case for 60 s
T_stg
Storage temperature range
D package
DB package
N package
NS package
J package
MIN MAX UNIT
7
V
7
V
5.5
V
73
82
°C/W
67
64
260
°C
300
°C
–65
150
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential output voltage V_OD, are with respect to network GND.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
3