|
OPA192_15 Datasheet, PDF (29/52 Pages) Texas Instruments – OPAx192 36-V, Precision, Rail-to-Rail Input/Output, Low Offset Voltage,Low Input Bias Current Op Amp with e-trim™ | |||
|
◁ |
www.ti.com
OPA192, OPA2192, OPA4192
SBOS620D â DECEMBER 2013 â REVISED SEPTEMBER 2015
8.3.7 Electrical Overstress
Designers often ask questions about the capability of an operational amplifier to withstand electrical overstress
(EOS). These questions tend to focus on the device inputs, but may involve the supply voltage pins or even the
output pin. Each of these different pin functions have electrical stress limits determined by the voltage breakdown
characteristics of the particular semiconductor fabrication process and specific circuits connected to the pin.
Additionally, internal electrostatic discharge (ESD) protection is built into these circuits to protect them from
accidental ESD events both before and during product assembly.
Having a good understanding of this basic ESD circuitry and its relevance to an electrical overstress event is
helpful. Figure 65 shows an illustration of the ESD circuits contained in the OPAx192 (indicated by the dashed
line area). The ESD protection circuitry involves several current-steering diodes connected from the input and
output pins and routed back to the internal power-supply lines, where the diodes meet at an absorption device or
the power-supply ESD cell, internal to the operational amplifier. This protection circuitry is intended to remain
inactive during normal circuit operation.
TVS
RF
R1
IN±
RS
IN+
ID
+
VIN
±
100 Â
100 Â
+VS
VDD
±
+
VSS
OPA192
Power-Supply
RL
ESD Cell
±VS
TVS
Figure 65. Equivalent Internal ESD Circuitry Relative to a Typical Circuit Application
Copyright © 2013â2015, Texas Instruments Incorporated
Submit Documentation Feedback
29
Product Folder Links: OPA192 OPA2192 OPA4192
|
▷ |