TMS320DM335_1 Datasheet, PDF (21/158 Pages) Texas Instruments – Digital Media System-on-Chip (DMSoC)

www.ti.com
TERMINAL
NAME
NO.
DDR_A09
W6
DDR_A08
W5
DDR_A07
V5
DDR_A06
U5
DDR_A05
W4
DDR_A04
V4
DDR_A03
W3
DDR_A02
W2
DDR_A01
V3
DDR_A00
V2
DDR_DQ15
W17
DDR_DQ14
V16
DDR_DQ13
W16
DDR_DQ12
U16
DDR_DQ11
W15
DDR_DQ10
W14
DDR_DQ09
V14
DDR_DQ08
U13
DDR_DQ07
W13
DDR_DQ06
V13
DDR_DQ05
W12
DDR_DQ04
U12
DDR_DQ03
T11
DDR_DQ02
U11
DDR_DQ01
W11
DDR_DQ00
V11
DDR_
DQGATE0
W18
DDR_
DQGATE1
V17
DDR_VREF
U10
V_{SSA_DLL}
V_{DDA33_DDRDL}
L
DDR_ZN
R11
R10
T9
TMS320DM335
Digital Media System-on-Chip (DMSoC)
SPRS528A – JULY 2008 – REVISED AUGUST 2008
Table 2-10. DDR Terminal Functions (continued)
TYPE ⁽¹⁾
OTHER ^{(2) (3)}
DESCRIPTION
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
I/O/Z
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
V_{DD_DDR}
DDR Address Bus bit 09
DDR Address Bus bit 08
DDR Address Bus bit 07
DDR Address Bus bit 06
DDR Address Bus bit 05
DDR Address Bus bit 04
DDR Address Bus bit 03
DDR Address Bus bit 02
DDR Address Bus bit 01
DDR Address Bus bit 00
DDR Data Bus bit 15
DDR Data Bus bit 14
DDR Data Bus bit 13
DDR Data Bus bit 12
DDR Data Bus bit 11
DDR Data Bus bit 10
DDR Data Bus bit 09
DDR Data Bus bit 08
DDR Data Bus bit 07
DDR Data Bus bit 06
DDR Data Bus bit 05
DDR Data Bus bit 04
DDR Data Bus bit 03
DDR Data Bus bit 02
DDR Data Bus bit 01
DDR Data Bus bit 00
DDR: Loopback signal for external DQS gating. Route to DDR and back to
DDR_DQGATE1 with same constraints as used for DDR clock and data.
DDR: Loopback signal for external DQS gating. Route to DDR and back to
DDR_DQGATE0 with same constraints as used for DDR clock and data.
DDR: Voltage input for the SSTL_18 I/O buffers. Note even in the case of
mDDR an external resistor divider connected to this pin is necessary.
DDR: Ground for the DDR DLL
DDR: Power (3.3 V) for the DDR DLL
DDR: Reference output for drive strength calibration of N and P channel
outputs. Tie to ground via 50 ohm resistor @ 0.5% tolerance.
Submit Documentation Feedback
Device Overview
21