RI-I11-110A-01 Datasheet, PDF (2/4 Pages) Texas Instruments – Tag-it™ HF TRANSPONDER INLAYS SQUARE RECTANGLE

RI-I11-110A-01
SCBS868 – FEBRUARY 2005 – REVISED DECEMBER 2006
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
Operating Temperature
Storage Temperature (single inlay)
Storage temperature (on reel)
VALUE
–25 to +70
–40 to +85
(warpage may occur at upper temperature range)
–40 to +40
www.ti.com
UNIT
°C
°C
°C
OPERATING CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
PARAMETER
Recommended Operating frequency
Passive Resonance Frequency (at +25°C)
Typ. required activation field strength to read (at +25°C)
Typ. required activation field strength to write (at +25°C)
Factory programmed Read Only Number
Memory (user programmable)
Uplink / downlink data rates
Typical programming cycles (at +25°C)
Data retention time (at +55°C)
Simultaneous Identification of Tags
Antenna size
Foil width
Foil pitch
Base material
Delivery
PART NUMBER
RI-I110A-01
13.56
14.26 MHz ± 400 kHz (includes frequency offset to
compensate further integration into paper or PVC
lamination; drops down to operating frequency when
exposed to activation field strength)
103 dBµA/m⁽¹⁾
108 dBµA/m⁽¹⁾
32 bits
256 bits organized in 8 × 32-bit blocks
26.7 kBd / 6.2 and 9 kBd
100,000
> 10 years
Up to 50 tags per second (reader/antenna dependent)
45 mm × 45mm (~1.77 in × ~1.77 in)
48 mm ± 0.5 mm (1.89 in ± 0.02 in)
50.8 mm +0.1mm/–0.4mm (~3.78 in)
Substrate: PET (Polyethylenetherephtalate)
Antenna: Aluminum
Single row tape wound on cardboard reel with 500 mm
diameter
Reel outer width: approx. 60 mm (~2.36 in)
Reel inner width: approx. 50 mm (~1.97 in)
Hub diameter: 76.2 mm (3 in)
UNIT
MHz
(1) After integration into paper or PVC Lamination
2
Submit Documentation Feedback