OPA452 Datasheet, PDF (2/17 Pages) Texas Instruments – 80V, 50mA OPERATIONAL AMPLIFIERS

ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage, V+ to V– ................................................................... 80V
Signal Input Terminals, Voltage⁽²⁾ .................. (V–) – 0.5V to (V+) + 0.5V
Current⁽²⁾ ...................................................... 5mA
Output Short-Circuit ................................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature .................................................................... +150°C
Lead Temperature (soldering 10s, TO-220) ................................... 300°C
(soldering 3s, DDPAK) ..................................... 240°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. (2) Input terminals are diode-clamped to the power-supply
rails. Input signals that can swing more than 0.5V beyond the supply rails
should be current limited to 5mA or less.
PACKAGE/ORDERING INFORMATION
For the most current package and ordering information, see the
Package Option Addendum located at the end of this data
sheet.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
2
OPA452, 453
www.ti.com
SBOS127C