 English |
|
|
|
|
|
|
|
| OPA4188_15 Datasheet, PDF (2/28 Pages) Texas Instruments – 0.03-μV/°C Drift, Low-Noise, Rail-to-Rail Output,36-V, Zero-Drift OPERATIONAL AMPLIFIERS | |||
| |||
| ◁ |
OPA4188
SBOS641B â JUNE 2012 â REVISED MARCH 2013
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE- PACKAGE
PRODUCT LEAD DESIGNATOR
SO-14
D
OPA4188
TSSOP-14
PW
PACKAGE INFORMATION(1)
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
â40°C to +125°C
OPA4188
â40°C to +125°C
OPA4188
ORDERING
NUMBER
OPA4188AID
OPA4188AIDR
OPA4188AIPW
OPA4188AIPWR
TRANSPORT MEDIA,
QUANTITY
Rails, 50
Tape and Reel, 2500
Rails, 90
Tape and Reel, 2000
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the
device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS(1)
Supply voltage
Signal input
terminals (2)
Output short-circuit(3)
Temperature range
Electrostatic
discharge (ESD)
ratings
Voltage
Current
Operating, TA
Storage, Tstg
Junction, TJ
Human body model (HBM)
Charged device model (CDM)
VALUE
±20, 40 (single supply)
(Vâ) â 0.5 to (V+) + 0.5
±10
Continuous
â55 to +150
â65 to +150
+150
2
1
UNIT
V
V
mA
°C
°C
°C
kV
kV
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5 V beyond the supply rails should
be current-limited to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package.
2
Submit Documentation Feedback
Product Folder Links: OPA4188
Copyright © 2012â2013, Texas Instruments Incorporated
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese