OPA3692IDBQT Datasheet, PDF (2/27 Pages) Texas Instruments – Triple, Wideband, Fixed Gain Video BUFFER AMPLIFIER With Disable

ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Power Supply ............................................................................... ±6.5V_DC
Internal Power Dissipation⁽²⁾ ............................ See Thermal Information
Differential Input Voltage⁽³⁾ ............................................................... ±1.2V
Input Voltage Range ............................................................................ ±V_S
Storage Temperature Range: D, DBQ ........................... –65°C to +125°C
Lead Temperature (soldering, 10s) .............................................. +300°C
Junction Temperature (T_J ) ........................................................... +175°C
ESD Resistance: HBM .................................................................... 2000V
CDM .................................................................... 1500V
MM ........................................................................ 200V
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. (2) Packages must be derated based on specified θ_JA.
Maximum T_J must be observed. (3) Noninverting input to internal inverting node.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PACKAGE/ORDERING INFORMATION⁽¹⁾
PRODUCT
OPA3692
"
OPA3692
"
PACKAGE-LEAD
SO-16
"
SSOP-16
"
PACKAGE
DESIGNATOR
D
"
DBQ
"
SPECIFIED
TEMPERATURE
RANGE
–40°C to +85°C
"
–40°C to +85°C
"
PACKAGE
MARKING
OPA3692
"
OPA3692
"
ORDERING
NUMBER
OPA3692ID
OPA3692IDR
OPA3692IDBQT
OPA3692IDBQR
TRANSPORT
MEDIA, QUANTITY
Rails, 48
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
NOTE: (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com.
PIN CONFIGURATION
Top View
OPA3692
402Ω
–IN A 1
402Ω
+IN A 2
DIS B 3
–IN B 4
402Ω
402Ω
+IN B 5
DIS C 6
–IN C 7
402Ω
402Ω
+IN C 8
16 DIS A
15 +V_S
14 OUT A
13 –V_S
12 OUT B
11 +V_S
10 OUT C
9 –V_S
SSOP, SO
ELECTRICAL CHARACTERISTICS: V_S = ±5V
Boldface limits are tested at +25°C.
G = +2 (–IN grounded) and R_L = 100Ω (see Figure 1 for AC performance only), unless otherwise noted.
OPA3692ID, OPA3692IDBQ
TYP
MIN/MAX OVER TEMPERATURE⁽¹⁾
PARAMETER
AC PERFORMANCE (see Figure 1)
Small-Signal Bandwidth (V_O < 0.5V_PP)
Bandwidth for 0.1dB Gain Flatness
Peaking at a Gain of +1
Large-Signal Bandwidth
Slew Rate
Rise-and-Fall Time
CONDITIONS
G = +1
G = +2
G = –1
G = +2, V_O < 0.5V_PP
V_O < 0.5Vp-p
G = +2, V_O = 5V_PP
G = +2, 4V Step
G = +2, V_O = 0.5V Step
G = +2, V_O = 5V Step
+25°C
+25°C
0°C to –40°C to
MIN/ TEST
70°C
+85°C UNITS MAX LEVEL^{(2 )}
280
225
220
120
0.2
220
2000
1.6
1.9
185
40
1
1400
180
35
1.5
1375
170
30
2
1350
MHz
typ
C
MHz
min
B
MHz
typ
C
MHz
min
B
dB
max
B
MHz
typ
C
V/µs
min
B
ns
typ
C
ns
typ
C
2
OPA3692
www.ti.com
SBOS228E