English
Language : 

BQ24313 Datasheet, PDF (2/22 Pages) Texas Instruments – OVERVOLTAGE AND OVERCURRENT PROTECTION IC AND Li+ CHARGER FRONT-END PROTECTION IC
◁
bq24313
bq24315
SLUS817A – MARCH 2008 – REVISED NOVEMBER 2008............................................................................................................................................... www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
DEVICE (2)
bq24313DSG
bq24315DSG
ORDERING INFORMATION(1)
OVP THRESHOLD
10.5V
5.85 V
PACKAGE
2mm x 2mm SON
2mm x 2mm SON
MARKING
NXQ
CGM
(1) For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI website at www.ti.com.
(2) To order a 3000 piece reel add R to the part number, or to order a 250 piece reel add T to the part
number.
PACKAGE DISSIPATION RATINGS
DESIGNATOR
DSG
PACKAGE
2×2 SON
RθJC
5°C/W
RθJA
75°C/W
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
VI
II
IO
ESD
TJ
Tstg
PARAMETER
Input voltage
Input current
Output current
Output sink current
Withstand Voltage
Junction temperature
Storage temperature
PIN
IN (with respect to VSS)
OUT (with respect to VSS)
ILIM, FAULT, CE, VBAT (with respect to VSS)
IN
OUT
FAULT
All (Human Body Model per JESD22-A114-E)
All (Machine Model per JESD22-A115-E)
All (Charge Device Model per JESD22-C101-C)
IN(IEC 61000-4-2) (with IN bypassed to the VSS
with a 1-µF low-ESR ceramic capacitor)
VALUE
–0.3 to 30
–0.3 to 12
–0.3 to 7
2
2
15
2000
200
500
15 (Air Discharge)
8 (Contact)
–40 to 150
–65 to 150
UNIT
V
A
A
mA
V
V
V
kV
°C
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage
values are with respect to the network ground terminal unless otherwise noted.
RECOMMENDED OPERATING CONDITIONS
over operating free-air temperature range (unless otherwise noted)
VIN
IIN
IOUT
R(ILIM)
TJ
Input voltage range
Input current, IN pin
Output current, OUT pin
OCP Programming resistor
Junction temperature
MIN
MAX UNIT
3.3
30
V
1.5
A
1.5
A
15
90
kΩ
–40
125
°C
2
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): bq24313 bq24315
 ▷