TLC274IDR Datasheet, PDF (17/53 Pages) Texas Instruments – The TLC274 and TLC279 quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high...

TLC274, TLC274A, TLC274B, TLC274Y, TLC279
LinCMOS PRECISION QUAD OPERATIONAL AMPLIFIERS
SLOS092D − SEPTEMBER 1987 − REVISED MARCH 2001
PARAMETER MEASUREMENT INFORMATION
single-supply versus split-supply test circuits
Because the TLC274 and TLC279 are optimized for single-supply operation, circuit configurations used for the
various tests often present some inconvenience since the input signal, in many cases, must be offset from
ground. This inconvenience can be avoided by testing the device with split supplies and the output load tied to
the negative rail. A comparison of single-supply versus split-supply test circuits is shown below. The use of either
circuit gives the same result.
VDD
VDD +
VO
VO
VI
CL
RL
VI
CL
RL
1/2 VDD
(a) SINGLE SUPPLY
VDD −
(b) SPLIT SUPPLY
Figure 1. Unity-Gain Amplifier
2 kΩ
2 kΩ
20 Ω
VDD
20 Ω
VO
VDD +
VO
20 Ω
20 Ω
(a) SINGLE SUPPLY
VDD −
(b) SPLIT SUPPLY
Figure 2. Noise-Test Circuit
100 Ω
VI
1/2 VDD
10 kΩ
VDD
VO
CL
100 Ω
VI
10 kΩ
VDD +
VO
CL
(a) SINGLE SUPPLY
VDD −
(b) SPLIT SUPPLY
Figure 3. Gain-of-100 Inverting Amplifier
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
17