DRV5053_15 Datasheet, PDF (15/24 Pages) Texas Instruments – DRV5053 Analog-Bipolar Hall Effect Sensor

www.ti.com
11 Device and Documentation Support
DRV5053
SLIS153B – MAY 2014 – REVISED SEPTEMBER 2014
11.1 Device Support
11.1.1 Device Nomenclature
Figure 17 shows a legend for reading the complete device name for and DRV5053 device.
DRV5053
(RA) (Q) (DBZ) (R)
()
Prefix
DRV5053: Analog linear hall sensor
Sensitivity
OA: ±11 mV/mT
PA: ±23 mV/mT
RA: ±45 mV/mT
VA: ±90 mV/mT
CA: +23 mV/mT
EA: +45 mV/mT
AEC-Q100
Q1: Automotive qualification
Blank: Non-auto
Tape and Reel
R: 3000 pcs/reel
T: 250 pcs/reel
M: 1000 pcs/bag (bulk)
Blank: 3000 pcs/box (ammo)
Package
DBZ: 3-pin SOT (SMT)
LPG: 3-pin SIP (through-hole)
Temperature Range
Q: ±40 to 125°C
E: ±40 to 150°C
Figure 17. Device Nomenclature
11.1.2 Device Markings
Marked Side
3
Marked Side Front
1
2
12 3
Marked Side
Figure 18. SOT-23 (DBZ) Package
12 3
(Bottom view)
Figure 19. SIP (LPG) Package
indicates the Hall effect sensor (not to scale). The Hall element is located in the center of the package with a
tolerance of ±100 µm. The height of the Hall element from the bottom of the package is 0.7 mm ±50 µm in the DBZ
package and 0.987 mm ±50 µm in the LPG package.
Copyright © 2014, Texas Instruments Incorporated
Product Folder Links: DRV5053
Submit Documentation Feedback
15