DRV5053_15 Datasheet, PDF (13/24 Pages) Texas Instruments – DRV5053 Analog-Bipolar Hall Effect Sensor

www.ti.com
9.2.1.3 Application Curve
DRV5053
SLIS153B – MAY 2014 – REVISED SEPTEMBER 2014
Figure 13. 10-kHz Switching Magnetic Field
9.2.2 Filtered Typical Application
For lower noise on the analog output OUT, additional RC filtering can be added to further reduce the bandwidth.
C2
1500 pF
OUT
2
R1
3
10 kΩ
VCC
VCC
1
C1
0.01 µF
(minimum)
Figure 14. Filtered Typical Application Schematic
9.2.2.1 Design Requirements
For this design example, use the parameters listed in Table 3 as the input parameters.
DESIGN PARAMETER
System bandwidth
Table 3. Design Parameters
REFERENCE
ƒ_BW
EXAMPLE VALUE
5 kHz
Copyright © 2014, Texas Instruments Incorporated
Product Folder Links: DRV5053
Submit Documentation Feedback
13