TS3V340_10 Datasheet, PDF (14/26 Pages) Texas Instruments – QUAD SPDT HIGH-BANDWIDTH VIDEO SWITCH WITH LOW AND FLAT ON-STATE RESISTANCE

TS3V340
QUAD SPDT HIGHĆBANDWIDTH VIDEO SWITCH
WITH LOW AND FLAT ONĆSTATE RESISTANCE
SCDS172A - JULY 2004 − REVISED DECEMBER 2004
PARAMETER MEASUREMENT INFORMATION
VBIAS
VIN
VEN
RIN = 10 Ω
EXT TRIGGER
BIAS
Network Analyzer
(HP8753ES)
P1
P2
VCC
DA
S1A
IN
EN
DUT
DB
S1B
RL = 150 Ω
RL = 150 Ω
50 Ω^†
† _{A 50-Ω termination resistor is needed for the network analyzer.}
Figure 10. Test Circuit for Crosstalk (X_TALK)
The crosstalk is measured at the output of the nonadjacent ON channel. For example, when V_IN = 0,
V_EN = 0, and D_A is the input, the output is measured at S1_B. All unused analog input (D) ports and output (S) ports
are connected to GND through 10-Ω and 50-Ω pulldown resistors, respectively.
HP8753ES setup
Average = 4
RBW = 3 kHz
V_BIAS = 0.35 V
ST = 2 s
P1 = 0 dBM
14
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265