TC241 Datasheet, PDF (13/18 Pages) Texas Instruments – 780- × 488-pixel ccd image sensor

VO
Vsat _(min)
TC241
780- × 488-PIXEL CCD IMAGE SENSOR
SOCS006C – AUGUST 1986 – REVISED DECEMBER 1991
PARAMETER MEASUREMENT INFORMATION
Blooming Point
With Antiblooming
Disabled
Blooming Point
With Antiblooming
Enabled
Dependent on
Well Capacity
Vuse _(max)
Level Dependent
Upon Antiblooming
Gate High Level
Vuse _(typ)
DR
Vn
+ DR (dynamic range)
camera white-clip voltage
V_n
Vn = noise-floor voltage
Vsat _(min) = minimum saturation voltage
Vuse _(max) = maximum usable voltage
Vuse _(typ) = typical user voltage (camera white clip)
Lux
(light input)
NOTES: A. Vuse _(typ) is defined as the voltage determined to equal the camera white clip. This voltage must be less than Vuse
(max).
B. A system trade-off is necessary to determine the system light sensitivity versus the signal/noise ratio. By lowering
the Vuse _(typ), the light sensitivity of the camera is increased; however, this sacrifices the signal/noise ratio of the
camera.
Figure 8. Typical V_sat, V_use Relationship
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
13