TLV1570 Datasheet, PDF (11/28 Pages) Texas Instruments – 2.7 V TO 5.5 V 8-CHANNEL 10-BIT 1.25-MSPS SERIAL ANALOG-TO-DIGITAL CONVERTER

TLV1570
2.7 V TO 5.5 V 8-CHANNEL 10-BIT 1.25-MSPS
SERIAL ANALOG-TO-DIGITAL CONVERTER
SLAS169A – DECEMBER 1997– REVISED SEPTEMBER 1998
definitions of specifications and terminology (continued)
total harmonic distortion (THD)
Total harmonic distortion is the ratio of the rms sum of the first six harmonic components to the rms value of the
measured input signal and is expressed as a percentage or in decibels.
spurious free dynamic range (SFDR)
Spurious free dynamic range is the difference in dB between the rms amplitude of the input signal and the peak
spurious signal.
absolute maximum ratings over operating free-air temperature (unless otherwise noted)^†
Supply voltage range, AGND to AV_DD, DGND to DV_DD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 6.5 V
Analog input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to AV_DD+0.3 V
Reference input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AV_DD+0.3 V
Digital input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to DV_DD+0.3 V
Operating virtual junction temperature range, T_J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 150°C
Operating free-air temperature range, T_A: TLV1570C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
TLV1570I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
recommended operating conditions
power supplies
Analog supply voltage, AVDD (see Note 1)
Digital supply voltage, DVDD (see Note 1)
NOTE 1: Abs (AVDD – DVDD) < 0.5 V
analog inputs
Analog input voltage, AIN
Reference input voltage, REF
digital inputs
High-level input voltage, VIH
Low-level input voltage, VIL
Input SCLK frequency
SCLK pulse duration, clock high, tw(SCLKH)
SCLK pulse duration, clock low, tw(SCLKL)
I/O and control rise time, SCLK, FS, CS, SDIN
I/O and control fall time, SCLK, FS, CS, SDIN
DVDD = 3.3 V to 2.7 V
DVDD = 5.5 V to 4.5 V
DVDD = 2.7 V to 5.5 V
DVDD = 2.7 V to 5.5 V
DVDD = 5.5 V to 4.5 V
DVDD = 3.6 V to 2.7 V
DVDD = 5.5 V to 4.5 V
DVDD = 3.6 V to 2.7 V
DVDD = 5.5 V to 4.5 V
DVDD = 3.6 V to 2.7 V
MIN TYP MAX UNIT
2.7
5.5 V
2.7
5.5 V
MIN
AGND
55% AVDD
60% AVDD
TYP MAX UNIT
VREF V
AVDD
V
AVDD
MIN TYP MAX UNIT
2.1
V
0.8 V
20
MHz
1
10
23
ns
46
23
ns
46
4
ns
4
ns
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
11