PT6360 Datasheet, PDF (11/14 Pages) Texas Instruments – 11 A 12-V Input Adjustable Integrated Switching Regulator

EPK (R–MSIP–G12)
MECHANICAL DATA
MMSI003A – SEPTEMBER 2001 – REVISED JUNE 2002
METAL SINGLE-IN-LINE MODULE
SUFFIX C
0.835 (21,21)
MAX.
0.675 (17,14)
MAX.
1.71 (43,43) MAX.
0.025 (0,63)
TYP.
0.017 (0,43) TYP.
0.100 (2,54) TYP.
1
0.032 (0,81)
TYP.
Gage Plane
0°–6°
0.315 (8,00)
0.160 (4,06) TYP.
0.017 (0,43) TYP.
Seating Plane
0.006 (0,15)
0.080 (2,03)
0.040 (1,01) TYP.
0.050
(1,27)
0.050
(1,27)
1.770 (44,95)
1.670 (42,42)
0.200 (5,08)
Note I
0.210
(5,33)
Note F
1
0.165
(4,19)
Note E
0.050 (1,27)
12 Places
0.100 (2,54)
11 Places
PC LAYOUT
NOTES: A. All linear dimensions are in inches (mm).
B. This drawing is subject to change without notice.
C. 2 place decimals are " 0.030 (" 0, 76 mm).
D. 3 place decimals are " 0.010 (" 0, 25 mm).
E. Recommended mechanical keep-out area.
F. Power pin connections should utilize two or more
vias per input, ground and output pin.
ø0.065 (1,65) MIN. 4 Places
Plated through connected
to ground plane
0.100
(2,54)
0.050
(1,27)
0.040
(1,01)
0.505
(12,83) _0.670
(17,10)
0.090
(2,28)
0.070
(1,77)
Note G
Note H
0.040 (1,01)
0.280 (7,11)
0.080 (2,03)
0.285 (7,24)
0.140
(3,55)
0.100
(2,54)
4203206/B 06/02
G. Vias are recommended to improve copper adhesion.
H. Solder mask openings to copper island for solder
joints to mechanical pins. Electrically connect
case to ground plane.
I. Case outline reference.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1