OPA340-EP_15 Datasheet, PDF (10/19 Pages) Texas Instruments – SINGLE-SUPPLY RAIL-TO-RAIL OPERATIONAL AMPLIFIERS

OPA340-EP
SBOS433A – AUGUST 2008 – REVISED APRIL 2011
V+
Reference
Current
V_IN+
V_IN-
V_BIAS1
V_BIAS2
Class AB
Control
Circuitry
www.ti.com
V_O
V-
(Ground)
Figure 24. Simplified Schematic
I_OVERLOAD
10mA max
V_IN
5kW
V+
OPAx340
V_OUT
Figure 25. Input Current Protection for Voltages Exceeding the Supply Voltage
RAIL-TO-RAIL OUTPUT
A class AB output stage with common-source
transistors is used to achieve rail-to-rail output. For
light resistive loads (> 50 kΩ), the output voltage is
typically a few millivolts from the supply rails. With
moderate resistive loads (2 kΩ to 50 kΩ), the output
can swing to within a few tens of millivolts from the
supply rails and maintain high open-loop gain. See
the typical characteristic curve Output Voltage Swing
vs Output Current.
10
Copyright © 2008–2011, Texas Instruments Incorporated