CC2540_15 Datasheet, PDF (10/35 Pages) Texas Instruments – 2.4-GHz Bluetooth® low energy System-on-Chip

CC2540F128, CC2540F256
SWRS084F – OCTOBER 2010 – REVISED JUNE 2013
ADC CHARACTERISTICS
T_A = 25°C and VDD = 3 V
PARAMETER
Input voltage
External reference voltage
External reference voltage differential
Input resistance, signal
Full-scale signal⁽¹⁾
ENOB ⁽¹⁾
Effective number of bits
THD
Useful power bandwidth
Total harmonic distortion
Signal to nonharmonic ratio
CMRR
DNL
Common-mode rejection ratio
Crosstalk
Offset
Gain error
Differential nonlinearity
INL
Integral nonlinearity
SINAD
(–THD+N)
Signal-to-noise-and-distortion
www.ti.com
TEST CONDITIONS
VDD is voltage on AVDD5 pin
VDD is voltage on AVDD5 pin
VDD is voltage on AVDD5 pin
Simulated using 4-MHz clock speed
Peak-to-peak, defines 0 dBFS
Single-ended input, 7-bit setting
Single-ended input, 9-bit setting
Single-ended input, 10-bit setting
Single-ended input, 12-bit setting
Differential input, 7-bit setting
Differential input, 9-bit setting
Differential input, 10-bit setting
Differential input, 12-bit setting
10-bit setting, clocked by RCOSC
12-bit setting, clocked by RCOSC
7-bit setting, both single and differential
Single ended input, 12-bit setting, –6
dBFS ⁽¹⁾
Differential input, 12-bit setting, –6
dBFS ⁽¹⁾
Single-ended input, 12-bit setting⁽¹⁾
Differential input, 12-bit setting⁽¹⁾
Single-ended input, 12-bit setting, –6
dBFS ⁽¹⁾
Differential input, 12-bit setting, –6
dBFS ⁽¹⁾
Differential input, 12-bit setting, 1-kHz
sine (0 dBFS), limited by ADC resolution
Single ended input, 12-bit setting, 1-kHz
sine (0 dBFS), limited by ADC resolution
Midscale
12-bit setting, mean⁽¹⁾
12-bit setting, maximum⁽¹⁾
12-bit setting, mean⁽¹⁾
12-bit setting, maximum⁽¹⁾
12-bit setting, mean, clocked by RCOSC
12-bit setting, max, clocked by RCOSC
Single ended input, 7-bit setting⁽¹⁾
Single ended input, 9-bit setting⁽¹⁾
Single ended input, 10-bit setting⁽¹⁾
Single ended input, 12-bit setting⁽¹⁾
Differential input, 7-bit setting⁽¹⁾
Differential input, 9-bit setting⁽¹⁾
Differential input, 10-bit setting⁽¹⁾
Differential input, 12-bit setting⁽¹⁾
MIN TYP MAX UNIT
0
VDD V
0
VDD V
0
VDD V
197
kΩ
2.97
V
5.7
7.5
9.3
10.3
6.5
bits
8.3
10
11.5
9.7
10.9
0–20
kHz
–75.2
dB
–86.6
70.2
79.3
78.8
dB
88.9
>84
dB
>84
dB
–3
mV
0.68%
0.05
LSB
0.9
4.6
13.3
LSB
10
29
35.4
46.8
57.5
66.6
dB
40.7
51.6
61.8
70.8
(1) Measured with 300-Hz sine-wave input and VDD as reference.
10
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: CC2540F128 CC2540F256