TPS54320 Datasheet, PDF (1/39 Pages) Texas Instruments – 4.5V to 17V Input 3A Synchronous Step Down SWIFT Converter

www.ti.com
TPS54320
SLVS982A – AUGUST 2010 – REVISED SEPTEMBER 2010
4.5V to 17V Input, 3A Synchronous Step Down SWIFT™ Converter
Check for Samples: TPS54320
FEATURES
1
•2 Integrated 57mΩ / 50mΩ MOSFETs
• Split Power Rail: 1.6V to 17V on PVIN
• 200kHz to 1.2MHz Switching Frequency
• Synchronizes to External Clock
• 0.8V Voltage Reference With ±1% Accuracy
• Low 2µA Shutdown Quiescent Current
• Hiccup Overcurrent Protection
• Monotonic Start-Up into Prebiased Outputs
• –40°C to 150°C Operating Junction
Temperature Range
• Pin-to-Pin Compatible with the TPS54620
• Adjustable Slow Start/Power Sequencing
• Power Good Output for Undervoltage and
Overvoltage Monitoring
• Adjustable Input Undervoltage Lockout
• Supported by SwitcherPro ™Software Tool
• For SWIFT™ Documentation and
SwitcherPro™, visit http://www.ti.com/swift
APPLICATIONS
• Broadband, Networking & Communication
Infrastructure
• Automated Test and Medical Equipment
• DSP and FPGA Point-of-Load Applications
from 12-V Bus
DESCRIPTION
The TPS54320 is a full featured 17V, 3A synchronous step down converter which is optimized for small designs
through high efficiency and integrated high-side and low-side MOSFETs. Further space savings are achieved
through current mode control, which reduces component count, and by selecting a high switching frequency,
reducing the inductor's footprint.
The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone
power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and
the open drain power good pins.
Cycle by cycle current limiting on the high-side FET protects the device in overload situations and is enhanced
by a low-side sourcing current limit which prevents current runaway. Hiccup protection will be triggered if the
overcurrent condition has persisted for longer than the preset time. Thermal shutdown disables the part when die
temperature exceeds thermal shutdown temperature. The TPS54320 is available in a 14 pin, 3.5mm x 3.5mm
QFN, thermally enhanced package.
WHITE SPACE
SIMPLIFIED SCHEMATIC
VIN
Cin
Css Rrt C2
PVIN
VIN
TPS54320
BOOT
Cboot
EN
PH
PWRGD
Lo
Co
SS/TR ^VSENSE
RT/CLK
COMP GND
R3
Exposed
Thermal
C1
Pad
VOUT
R1
R2
100
95
90
85
80
75
70
65
60
55
50
0
VOUT = 1.8 V ^{VOUT = 3.3 V VOUT = 5 V}
VIN = 12 V,
Fsw = 500 kHz
0.5
1
1.5
2
2.5
3
Load Current - A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SwitcherPro, SWIFT are trademarks of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated