|
TPS40170_15 Datasheet, PDF (1/47 Pages) Texas Instruments – TPS40170 4.5 V to 60 V Wide Input Synchronous PWM Buck Controller | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS40170
SLUS970B â NOVEMBER 2013 â REVISED DECEMBER 2014
TPS40170 4.5 V to 60 V Wide Input Synchronous PWM Buck Controller
1 Features
â¢1 Wide Input Voltage Range from 4.5 V to 60 V
⢠600 mV Reference Voltage with 1% Accuracy
⢠Programmable UVLO and Hysteresis
⢠Voltage Mode Control With Voltage Feed Forward
⢠Programmable Frequency Between 100 kHz and
600 kHz
⢠Bi-directional -Frequency Synchronization With
Master/Slave Option
⢠Low-side FET Sensing Overcurrent Protection and
High-Side FET Sensing Short-Circuit Protection
With Integrated Thermal Compensation
⢠Programmable Closed Loop Soft-Start
⢠Supports Pre-Biased Outputs
⢠Thermal Shutdown at 165°C with Hysteresis
⢠Voltage Tracking
⢠Powergood
⢠ENABLE with 1-µA Low Current Shutdown
⢠8.0-V and 3.3-V LDO Output
⢠Integrated Bootstrap Diode
⢠20-Pin 3.5 mm à 4.5 mm VQFN (RGY) Package
2 Applications
⢠POL Modules
⢠Wide Input Voltage, High-Power Density DC - DC
Converters for Industrial, Networking and Telecom
Equipment
Simplified Application
VIN
1
ENABLE
20
UVLO
2 SYNC
VIN 19
3 M/S
BOOT 18
4 RT
HDRV 17
5 SS
SW 16
TPS40170
6 TRK
VBP 15
7 FB
LDRV 14
8 COMP
PGND 13
9 AGND
VDD
10
ILIM 12
PGOOD
11
V
OUT
3 Description
TPS40170 is a full-featured, synchronous PWM buck
controller that operates at an input voltage between
4.5 V and 60 V and is optimized for high-power
density, high-reliability DC-DC converter applications.
The controller implements voltage-mode control with
input voltage feed-forward compensation that enables
instant response to input voltage change. The
switching frequency is programmable from 100 kHz to
600 kHz.
The TPS40170 has a complete set of system
protection and monitoring features such as
programmable undervoltage lockout (UVLO),
programmable overcurrent protection (OCP) by
sensing the low-side FET, selectable short-circuit
protection (SCP) by sensing the high-side FET and
thermal shutdown. The ENABLE pin allows for
system shutdown in a low-current (1 µA typical)
mode. The controller supports pre-biased output,
provides an open-drain PGOOD signal, and has
closed-loop soft-start, output voltage tracking and
adaptive dead-time control.
TPS40170 provides accurate output voltage
regulation through 1% ensured accuracy.
Additionally, the controller implements a novel
scheme of bi-directional synchronization with one
controller acting as the master and other downstream
controllers acting as slaves synchronized to the
master in-phase or 180° out-of-phase. Slave
controllers can be synchronized to an external clock
within ±30% of the free-running switching frequency.
Device Information(1)
PART NUMBER PACKAGE
BODY SIZE (NOM)
TPS40170
VQFN (20)
3.50 mm à 4.50 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Efficiency vs. Load Current
100
95
90
85
80
VIN = 12 V
75
VIN = 24 V
VIN = 48 V
70
0
1
2
3
4
5
6
Load Current (A)
UDG-09219
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |