TPS40132_15 Datasheet, PDF (1/42 Pages) Texas Instruments – TWO-PHASE, SYNCHRONOUS BUCK CONTROLLER WITH INTEGRATED MOSFET DRIVERS

www.ti.com
TPS40132
SLUS776B – DECEMBER 2007 – REVISED JUNE 2011
TWO-PHASE, SYNCHRONOUS BUCK CONTROLLER
WITH INTEGRATED MOSFET DRIVERS
Check for Samples: TPS40132
FEATURES
1
•2 Supports 5-V Output
• Two-Phase Interleaved Operation
• Operates With Pre-Biased Outputs
• 1-V to 40-V Power Stage Operation Range
• Requires VIN5 at 50 mA (typ) Depending on
External MOSFETs and Switching
Frequency
• 10-μA Shutdown Current
• Programmable Switching Frequency up to 1
MHz/Phase
• Current Mode Control with Forced Current
Sharing
• 0.6-V Reference Voltage with 0.8% Accuracy
from 0°C to 85°C Temperature Range
• Resistive Divider Sets Direct Output
Overvoltage Threshold.
• Programmable Input Undervoltage Lockout
• True Remote Sensing Differential Amplifier
• Resistive or Inductor’s DCR Current Sensing
• 32-Pin QFN Package
• Can Be Used with TPS40120 to Provide a 6-Bit
Digitally Controlled Output
APPLICATIONS
• Point-of-Load Converter
• Graphic Cards
• Internet Servers
• Networking Equipment
• Telecommunications Equipment
• DC Power Distributed Systems
RHB PACKAGE
(TOP VIEW)
BOOT1
OVSET
VOUT
GSNS
DIFFO
CS1
CSRT1
COMP
32 31 30 29 28 27 26 25
1
24
2
23
3
22
4
21
5
20
6
19
7
18
89
10
11
12 13
14
15
17
16
BOOT2
SS
UVLO
BP5
AGND
CS2
CSRT2
RT
DESCRIPTION
The TPS40132 is a two-phase synchronous buck
controller that is optimized for low-output voltage,
high-output current applications powered from a
supply between 1 V and 40 V. A multi-phase
converter offers several advantages over a single
power stage including lower current ripple on the
input and output capacitors, faster transient response
to load steps, improved power handling capabilities,
and higher system efficiency.
Each phase can be operated at a switching frequency
up to 1 MHz, resulting in an effective ripple frequency
of up to 2 MHz at the input and the output. The two
phases operates 180 degrees out-of-phase.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2011, Texas Instruments Incorporated