English
Language : 

TLV320AIC3111 Datasheet, PDF (1/156 Pages) Texas Instruments – Low-Power Audio Codec With Embedded miniDSP and Stereo Class-D Speaker Amplifier
TLV320AIC3111
www.ti.com
SLAS644B – JULY 2009 – REVISED OCTOBER 2009
Low-Power Audio Codec With Embedded miniDSP
and Stereo Class-D Speaker Amplifier
Check for Samples: TLV320AIC3111
1 INTRODUCTION
1.1 Features
•1234 Stereo Audio DAC With 95-dB SNR
• Mono Audio ADC With 91-dB SNR
• Supports 8-kHz to 192-kHz SepArate DAC and
ADC Sample Rates
• Instruction-Programmable Embedded miniDSP
• Stereo 1.29-W Class-D BTL 8-Ω Speaker Driver
With Direct Battery Connection
• One Differential and Three Single-Ended Inputs
With Mixing and Level Control
• Microphone With Bias, Preamp PGA, and AGC
• Built-in Digital Audio Processing Blocks With
User-Programmable Biquad and FIR Filters
• Digital Mixing Capability
• Programmable Digital Audio Processor for
Bass Boost/Treble/EQ With up to Five Biquads
for Record and up to Six Biquads for Playback
• Pin Control or Register Control for
Digital-Playback Volume-Control Settings
• Sine-Wave Generator for Beep
• Integrated PLL Used for Programmable Digital
Audio Processor
• I2S, Left-Justified, Right-Justified, DSP, and
TDM Audio Interfaces
• I2C Control With Register Auto-Increment
• Full Power-Down Control
• Power Supplies:
– Analog: 2.7 V–3.6 V
– Digital Core: 1.65 V–1.95 V
– Digital I/O: 1.1 V–3.6 V
– Class-D: 2.7 V–5.5V (SPLVDD and SPRVDD ≥
AVDD)
• 5-mm × 5-mm 32-QFN Package
1.2 Applications
• Portable Audio Devices
• Mobile Internet Devices
• Adaptive Filtering Applications
1.3 Description
The TLV320AIC3111 is a low-power, highly
integrated, high-performance codec which provides a
stereo audio DAC and mono audio ADC.
The TLV320AIC3111 features a high-performance
audio codec with 16-bit stereo playback and
monaural record functionality. The device integrates
several analog features, such as a microphone
interface, headphone drivers, and speaker drivers.
The TLV320AIC3111 has a fully programmable
miniDSP for digital audio processing. The digital
audio data format is programmable to work with
popular audio standard protocols (I2S,
left/right-justified) in master, slave, DSP, and TDM
modes. Bass boost, treble, or EQ can be supported
by the programmable digital signal-processing block.
An on-chip PLL provides the high-speed clock
needed by the digital signal processing block. The
volume level can be controlled by either pin control or
by register control. The audio functions are controlled
using the I2C serial bus.
The TLV320AIC3111 has a programmable beep
generator and is available in a 32-pin QFN package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PurePath is a trademark of Texas Instruments.
2
MATLAB is a trademark of The MathWorks, Inc.
3
All other trademarks are the property of their respective owners.
4
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated