TL331-EP_15 Datasheet, PDF (1/11 Pages) Texas Instruments – SINGLE DIFFERENTIAL COMPARATOR

TL331-EP
www.ti.com
SLVSBU6 – JUNE 2013
SINGLE DIFFERENTIAL COMPARATOR
Check for Samples: TL331-EP
FEATURES
1
• Single Supply or Dual Supplies
• Wide Range of Supply Voltage: 2 V to 36 V
• Low Supply-Current Drain Independent of
Supply Voltage: 0.4 mA Typ.
• Low Input Bias Current: 25 nA Typ.
• Low Input Offset Voltage: 2 mV Typ.
• Common-Mode Input Voltage Range Includes
Ground
• Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±36 V
• Low Output Saturation Voltage
• Output Compatible With TTL, MOS, and CMOS
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly and Test Site
• One Fabrication Site
• Available in Military (–55°C to 125°C)
Temperature Range
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
DBV PACKAGE
(TOP VIEW)
IN− 1
V_CC−/GND 2
IN+ ³
5 V_CC
4 OUT
DESCRIPTION/ORDERING INFORMATION
This device consists of a single voltage comparator designed to operate from a single power supply over a wide
range of voltages. Operation from dual supplies also is possible if the difference between the two supplies is 2 V
to 36 V and V_CC is at least 1.5 V more positive than the input common-mode voltage. Current drain is
independent of the supply voltage. To achieve wired-AND relationships, one can connect the output to other
open-collector outputs.
T_A
–55°C to 125°C
V_IO(MAX) at 25°C
5 mV
ORDERING INFORMATION⁽¹⁾
PACKAGE
ORDERABLE PART
NUMBER
SOT-23 (DBV)
Reel of 250
TL331MDBVTEP
TOP-SIDE
MARKING
TEPU
VID NUMBER
V62/13611-01XE
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated