TIL311_1 Datasheet, PDF (1/5 Pages) Texas Instruments – HEXADECIMAL DISPLAY WITH LOGIC

TIL311
HEXADECIMAL DISPLAY WITH LOGIC
SODS001D – MARCH 1972 – REVISED DECEMBER 1997
SOLID-STATE HEXADECIMAL DISPLAY WITH
INTEGRAL TTL CIRCUIT TO ACCEPT, STORE,
AND DISPLAY 4-BIT BINARY DATA
D 0.300-Inch (7,62-mm) Character Height
D Internal TTL MSI Chip With Latch, Decoder,
D High Brightness
D Left-and-Right-Hand Decimals
D Separate LED and Logic Power Supplies
May Be Used
D Wide Viewing Angle
and Driver
D Operates from 5-V Supply
D Constant-Current Drive for Hexadecimal
Characters
D Easy System Interface
mechanical data
These assemblies consist of display chips and a TTL MSI chip mounted on a header with a red molded plastic
body. Multiple displays may be mounted on 0.450-inch (11,43-mm) centers.
CL OF PIN 1
0.420 (10,67)
0.380 (9,65)
0.075 (1,91) MAX
0.010 (0,25) NOM
4 Sides
0.070 (1,78)
CL OF PIN 1
0.150 (3,80)
5°
14
0.086 (2,16)
MAX
13
0.270 (6,90)
0.760 (19,31)
12
0.720 (18,29)
0.015 (0,38)
0.170 (4,30)
0.160 (4,10)
Logic
Chip
10
0.160 (4,10)
8
0.300 (7,62)
0.010 (0,26)
0.075 (1,91) MAX
1
2
3
0.022 (0,56)
0.018 (0,46)
4
DIA All Pins
5
0.100 (2,54) TP
12 Places
(See Note B)
7
0.085 (2,16) MAX
Seating Plane
0.170 (4,32) MIN
0.140 (3,60)
0.110 (2,80)
0.022 (0,56)
DIA All Pins
0.018 (0,46)
PIN 1 LED SUPPLY VOLTAGE
PIN 2 LATCH DATA INPUT B
PIN 3 LATCH DATA INPUT A
PIN 4 LEFT DECIMAL POINT CATHODE
PIN 5 LATCH STROBE INPUT
PIN 6 OMITTED
PIN 7 COMMON GROUND
PIN 8 BLANKING INPUT
PIN 9 OMITTED
PIN 10 RIGHT DECIMAL POINT CATHODE
PIN 11 OMITTED
PIN 12 LATCH DATA INPUT D
PIN 13 LATCH DATA INPUT C
PIN 14 LOGIC SUPPLY VOLTAGE, VCC
NOTES: A. All linear dimensions are in inches and (parenthetically) in millimeters.
B. The true-position pin spacing is 0.100 (2,54) between centerlines. Each centerline is located
within 0.010 ( 0,26) of its true longitudinal position relative to pins 1 and 14.
C. Associated centerlines of character segments and decimal point dimensions are nominal.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1997, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
1