TIL306 Datasheet, PDF (1/9 Pages) Texas Instruments – NUMERIC DISPLAYS WITH LOGIC

TIL306, TIL307
NUMERIC DISPLAYS WITH LOGIC
SLBS001 – D1034, JUNE 1982 – REVISED SEPTEMBER 1992
SOLID-STATE DISPLAYS WITH INTEGRAL TTL MSI CIRCUIT CHIP FOR USE
IN ALL SYSTEMS WHERE THE DATA TO BE DISPLAYED IS THE PULSE COUNT
• 6,9-mm (0.270-Inch) Character Height
• Wide Viewing Angle
• High Luminous Intensity
• TIL306 Has Left Decimal
• TIL307 Has Right Decimal
• Easy System Interface
• Internal TTL MSI Chip and Counter, Latch,
Decoder, and Driver
• Constant-Current Drive for Light-Emitting
Diodes
mechanical data
These assemblies consist of display chips and a TTL MSI chip mounted on a header with a red molded plastic
body. Multiple displays may be mounted on 11,43-mm (0.450-inch) centers.
PIN ASSIGNMENTS
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
QB
QC
QD
QA
LS
RBI
MAX-COUNT
GND
Pin 9
Pin 10
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin16
PCEI
SCEI
RBO
CLR
DP
BI
CLK
VCC
Seating Plane
(see Note A)
4,32 (0.170) MIN
CL of Pin 1
3,81 (0.150)
CL of Pin 1
2,54 (0.100)
4,42 (0.174)
Decimal Point
TIL307
6,45 (0.254)
10°
7,87 (0.310)
7,62 (0.300)
4,45 (0.175)
3,94 (0.155)
4 Places
3,56 (0.140)
2,79 (0.110)
0,56 (0.022)
0,46 (0.018)
DIA All Pins
1,52 (0.060)
1,02 (0.040)
1
0,66 (0.026)
3,81 (0.150)
0,66 (0.026)
3,81 (0.150)
2,54 (0.100) T.P.
14 Places
(see Note C)
26,67 (1.050)
25,65 (1.010)
Logic Chip
Decimal Point
TIL306
TOP VIEW
TIL306
A
FG B
E
C
D.P. _D
TIL307
A
FG B
E
D
C
D.P.
ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES
10,67 (0.420)
9,65 (0.380)
NOTES: A. Lead dimensions are not controlled above the seating plane.
B. Centerlines of character segments and decimal points are shown as dashed lines. Associated dimensions are nominal.
C. The true-position pin spacing is 2,54 mm (0.100 inch) between centerlines. Each centerline is located with 0,26 mm (0.010 inch) of
its true longitudinal position relative to pins 1 and 16.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1992, Texas Instruments Incorporated
1