SN74AUC2G241_08 Datasheet, PDF (1/14 Pages) Texas Instruments – DUAL BUFFER/DRIVER WITH 3-STATE OUTPUTS

www.ti.com
SN74AUC2G241
DUAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCES535C – DECEMBER 2003 – REVISED JANUARY 2007
FEATURES
• Available in the Texas Instruments
NanoFree™ Package
• Optimized for 1.8-V Operation and Is 3.6-V I/O
Tolerant to Support Mixed-Mode Signal
Operation
• I_off Supports Partial-Power-Down Mode
Operation
• Sub-1-V Operable
• Max t_pd of 1.9 ns at 1.8 V
• Low Power Consumption, 10 µA at 1.8 V
• ±8-mA Output Drive at 1.8 V
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DCT PACKAGE
(TOP VIEW)
DCU PACKAGE
(TOP VIEW)
YZP PACKAGE
(BOTTOM VIEW)
1OE
1
1A
2
2Y
3
8
V_CC
7
2OE
6
1Y
1OE 1
1A 2
2Y 3
GND 4
8
V_CC
7 2OE
6 1Y
5 2A
GND 4 5 2A
2Y 3 6 1Y
1A 2 7 2OE
1OE 1 8 ^VCC
GND
4
5
2A
See mechanical drawings for dimensions.
DESCRIPTION/ORDERING INFORMATION
This dual buffer/driver is operational at 0.8-V to 2.7-V V_CC, but is designed specifically for 1.65-V to 1.95-V V_CC
operation.
The SN74AUC2G241 is designed specifically to improve the performance and density of 3-state memory
address drivers, clock drivers, and bus-oriented receivers and transmitters.
The device is organized as two 1-bit line drivers with separate output-enable (1OE, 2OE) inputs. When 1OE is
low or 2OE is high, the device passes data from the A inputs to the Y outputs. When 1OE is high or 2OE is low,
the outputs are in the high-impedance state.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
ORDERING INFORMATION
T_A
–40°C to 85°C
PACKAGE ⁽¹⁾
NanoFree™ – WCSP (DSBGA)
0.23-mm Large Bump – YZP (Pb-free)
SSOP – DCT
Reel of 3000
Reel of 3000
ORDERABLE PART NUMBER TOP-SIDE MARKING⁽²⁾
SN74AUC2G241YZPR
_ _ _U2_
SN74AUC2G241DCTR
U41_ _ _
VSSOP – DCU
Reel of 3000
SN74AUC2G241DCUR
U2_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) DCT: The actual top-side marking has three additional characters that designate the year, month, and assembly/test site.
DCU: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2007, Texas Instruments Incorporated