|
PCM2704C_15 Datasheet, PDF (1/47 Pages) Texas Instruments – PCM270xC Stereo Audio DAC With USB Interface, Single-Ended Headphone Output andS/PDIF Output | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Burr-Brown Audio
PCM2704C, PCM2705C, PCM2706C, PCM2707C
SBFS036B â MAY 2015 â REVISED AUGUST 2015
PCM270xC Stereo Audio DAC With USB Interface, Single-Ended Headphone Output and
S/PDIF Output
1 Features
â¢1 On-Chip USB Interface:
â No Dedicated Device Driver Needed
â Full-Speed Transceivers
â Fully Compliant With USB 2.0 Specification
â USB 1.1 Descriptors With USB Audio Class
Support
â Certified by USB-IF
â Partially Programmable Descriptors
â Adaptive Isochronous Transfer for Playback
â Bus-Powered or Self-Powered Operation
⢠Sampling Rates: 32 kHz, 44.1 kHz, and 48 kHz
⢠On-Chip Clock Generator With Single 12-MHz
Clock Source
⢠Single Power Supply:
â Bus-Powered: 5 V, Typical (VBUS)
â Self-Powered: 3.3 V, Typical
⢠16-Bit Delta-Sigma Stereo DAC
â Analog Performance at 5 V (Bus-Powered),
3.3 V (Self-Powered):
â THD + N: 0.006% RL > 10 kâ¦, Self-
Powered
â THD + N: 0.025% RL = 32 â¦
â SNR = 98 dB
â Dynamic Range: 98 dB
â PO = 12 mW, RL = 32 â¦
â Oversampling Digital Filter
â Passband Ripple = ±0.04 dB
â Stop-Band Attenuation = â50 dB
â Single-Ended Voltage Output
â Analog LPF Included
⢠Multiple Functions:
â Up to Eight Human Interface Device (HID)
Interfaces (Model and Setting Dependent)
â Suspend Flag
â S/PDIF Out With SCMS
â External ROM Interface (PCM2704C/6C)
â Serial Programming Interface (PCM2705C/7C)
â I2S Interface (Selectable on PCM2706C/7C)
2 Applications
⢠USB Headphones
⢠USB Audio Speaker
⢠USB CRT/LCD Monitor
⢠USB Audio Interface Box
⢠USB-Featured Consumer Audio Product
3 Description
The PCM270xC are TI's single-chip USB stereo
audio digital-to-analog converters (DACs) with USB
2.0 compliant full-speed protocol controller and
S/PDIF. The USB-protocol controller works with no
software code, but USB descriptors can be modified
in some areas (for example, vendor ID/product ID)
through the use of an external ROM (PCM2704C and
PCM2706C) or serial peripheral interface (SPI)
(PCM2705C and PCM2707C). The PCM270xC also
employ SpAct⢠architecture, TI's unique system that
recovers the audio clock from USB packet data. On-
chip analog phase-locked loops (PLLs) with SpAct
enable playback with low clock jitter.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
PCM2704C
PCM2705C
SSOP (28)
5.30 mm à 10.20 mm
PCM2706C
PCM2707C
TQFP (32)
7.00 mm à 7.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Block Diagram
USB
HID Controls
External ROM
SPI
PCM2704C/5C/6C/7C
Line Out
S/PDIF
I2S
VDD
VCCL
VCCR
VCCP
PGND
AGNDR
AGNDL
ZGND
DGND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |