OPA2348-DIE Datasheet, PDF (1/5 Pages) Texas Instruments – CMOS Rail-to-Rail Operational Amplifier

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
OPA2348-DIE CMOS Rail-to-Rail Operational Amplifier
OPA2348-DIE
SBOS715 – MAY 2014
1 Features
3 Description
•1 Separated (Sawn) Die Mounted on Wafer Tape
• Low Quiescent Current (I_Q)
• Low Cost
• Rail-to-Rail Input and Output
2 Applications
The OPA2348-DIE is a single-supply low-power
CMOS operational amplifier. The OPA2348-DIE is
useful for low-power applications.
Low supply current and an input bias current make
the OPA2348-DIE an optimal candidate for low-power
high-impedance applications such as smoke
detectors and other sensors.
• Portable Equipment
• Battery-Powered Equipment
• Smoke Alarms
• CO Detectors
• Medical Instrumentation
Ordering Information⁽¹⁾
PRODUCT
PACKAGE
DESIGNATOR
PACKAGE
ORDERABLE PART NUMBER PACKAGE QUANTITY
OPA2348-DIE
TD
Bare die in waffle pack⁽²⁾
OPA2348TDB1
300
OPA2348TDB2
10
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality
Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room
temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not
warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.