OPA2340TDF1 Datasheet, PDF (1/5 Pages) Texas Instruments – SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIER MicroAmplifier

OPA2340-DIE
www.ti.com
SBOS691A – JUNE 2013 – REVISED SEPTEMBER 2013
SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIER
MicroAmplifier ™
Check for Samples: OPA2340-DIE
FEATURES
1
•23 Rail-to-Rail Input
• Rail-to-Rail Output
• Wide Bandwidth
• High Slew Rate
• Low THD+Noise
• Low Quiescent Current
• Single, Dual, and Quad Versions
APPLICATIONS
• Driving A/D Converters
• PCMCIA Cards
• Data Acquisition
• Process Control
• Audio Processing
• Communications
• Active Filters
• Test Equipment
DESCRIPTION
The OPA2340-DIE rail-to-rail CMOS operational amplifier is optimized for low-voltage, single-supply operation.
Rail-to-rail input/output and high-speed operation make them ideal for driving sampling analog-to-digital (A/D)
converters. The OPA2340-DIE is also well-suited for general purpose and audio applications as well as providing
I/V conversion at the output of digital-to-analog (D/A) converters. Single, dual, and quad versions have identical
specifications for design flexibility.
The OPA2340-DIE operates on a single supply. Dual and quad designs feature completely independent circuitry
for lowest crosstalk and freedom from interaction.
PRODUCT
OPA2340
PACKAGE
DESIGNATOR
TD
ORDERING INFORMATION⁽¹⁾
PACKAGE
ORDERABLE PART NUMBER PACKAGE QUANTITY
Bare die in waffle pack⁽²⁾
OPA2340TDF1
100
OPA2340TDF2
10
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality
Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room
temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not
warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MicroAmplifier is a trademark of Texas Instruments, Inc.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated