MSP430F563X Datasheet, PDF (1/101 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

www.ti.com
MSP430F563x
SLAS650A – JUNE 2010 – REVISED JULY 2010
MIXED SIGNAL MICROCONTROLLER
FEATURES
1
• Low Supply Voltage Range, 1.8 V to 3.6 V
• Ultralow Power Consumption
– Active Mode (AM): TBD
– Standby Mode (LPM3 WDT Mode): TBD
– Off Mode (LPM4 RAM Retention): TBD
– Shutdown Mode (LPM3.5 RTC Mode): TBD
– Shutdown Mode (LPM4.5): TBD
• Wake-Up From Standby Mode in Less Than
5 µs
• 16-Bit RISC Architecture, Extended Memory,
up to 20-MHz System Clock
• Flexible Power Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring,
and Brownout
• Unified Clock System
– FLL Control Loop for Frequency
Stabilization
– Low Power/Low Frequency Internal Clock
Source (VLO)
– Low Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Crystals (XT1)
– High-Frequency Crystals Up to 32 MHz
(XT2)
• 16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven
Capture/Compare Shadow Registers
• Two Universal Serial Communication
Interfaces
– USCI_A0 and USCI_A1 Each Supporting
– Enhanced UART supporting
Auto-Baudrate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1 Each Supporting
– I²C^TM
– Synchronous SPI
• Full-Speed Universal Serial Bus (USB)
– Integrated USB-PHY
– Integrated 3.3-V/1.8-V USB Power System
– Integrated USB-PLL
– Eight Input, Eight Output Endpoints
• 12-Bit Analog-to-Digital (A/D) Converter With
Internal Shared Reference, Sample-and-Hold,
and Autoscan Feature
• Dual 12-Bit Digital-to-Analog (D/A) Converters
With Synchronization
• Comparator
• Hardware Multiplier Supporting 32-Bit
Operations
• Flash Memory
– Serial Onboard Programming, No External
Programming Voltage Needed
• Six-Channel Internal DMA
• Real-Time Clock Module With Supply Voltage
Backup Switch
• Family Members are Summarized in Table 1
• For Complete Module Descriptions, See the
MSP430x5xx/MSP430x6xx Family User's Guide
(SLAU208)
DESCRIPTION
The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low power
modes is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 5 µs.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2010, Texas Instruments Incorporated