MSP430C13X1 Datasheet, PDF (1/35 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430C13x1
MIXED SIGNAL MICROCONTROLLER
D Low Supply-Voltage Range, 1.8 V to 3.6 V
D Ultralow-Power Consumption:
− Active Mode: 160 µA at 1 MHz, 2.2 V
− Standby Mode: 0.9 µA
− Off Mode (RAM Retention) : 0.1 µA
D Five Power-Saving Modes
D Wake-Up From Standby Mode in less
than 6 µs
D 16-Bit RISC Architecture,
125-ns Instruction Cycle Time
D 16-Bit Timer_B With Three
Capture/Compare-With-Shadow Registers
D 16-Bit Timer_A With Three
Capture/Compare Registers
SLAS341B − SEPTEMBER 2001 − REVISED SEPTEMBER 2004
D On-Chip Comparator
D Serial Communication Interface (USART),
Software Selects Asynchronous UART or
Synchronous SPI
D Programmable Code Protection With
Security Fuse
D Family Members Include:
− MSP430C1331: 8KB ROM, 256B RAM
− MSP430C1351: 16KB ROM, 512B RAM
D Available in 64-Pin Quad Flat Pack (QFP)
D Emulation: Use MSP430F13xIPM
D For Complete Module Descriptions, See the
MSP430x1xx Family User’s Guide,
Literature Number SLAU049
description
The Texas Instruments MSP430 family of ultralow-power microcontrollers consist of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low power
modes is optimized to achieve extended battery life in portable measurement applications. The device features
a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.
The MSP430C13x1 is a microcontroller configuration with two built-in 16-bit timers, one universal serial
synchronous/asynchronous communication interfaces (USART), and 48 I/O pins.
Typical applications include sensor systems that capture analog signals, convert them to digital values, and
process and transmit the data to a host system. The timers make the configurations ideal for industrial control
applications, hand-held meters, etc.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
PLASTIC 64-PIN QFP
(PM)
−40°C to 85°C
MSP430C1331IPM
MSP430C1351IPM
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2001 − 2004, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1