LP3982IMM-1.8 Datasheet, PDF (1/23 Pages) Texas Instruments – LP3982 Micropower, Ultra Low-Dropout, Low-Noise, 300 mA CMOS Regulator

LP3982
www.ti.com
SNVS185D – FEBRUARY 2002 – REVISED APRIL 2013
LP3982 Micropower, Ultra Low-Dropout, Low-Noise, 300 mA CMOS Regulator
Check for Samples: LP3982
FEATURES
1
•2 MAX8860 Pin, Package and Spec. Compatible
• WSON Space Saving Package
• 300 mA Output Current
• 120 mV Typical Dropout @ 300 mA
• 90 μA Typical Quiescent Current
• 1 nA Typical Shutdown Mode
• 60 dB Typical PSRR
• 2.5V to 6V Input Range
• 120μs Typical Turn-on Time
• Stable with Small Ceramic Output Capacitors
• 37 μV RMS Output Voltage Noise (10 Hz to 100
kHz)
• Over-Temperature/Over-Current Protection
• ±2% Output Voltage Tolerance
APPLICATIONS
• Wireless Handsets
• DSP Core Power
• Battery Powered Electronics
• Portable Information Appliances
DESCRIPTION
The LP3982 low-dropout (LDO) CMOS linear
regulator is available in 1.8V, 2.5V, 2.77V, 2.82V,
3.0V, 3.3V, and adjustable versions. They deliver 300
mA of output current. Packaged in an 8-Pin VSSOP,
the LP3982 is pin and package compatible with
Maxim's MAX8860. The LM3982 is also available in
the small footprint WSON package.
The LP3982 suits battery-powered applications
because of its shutdown mode (1nA typ), low
quiescent current (90 μA typ), and LDO voltage (120
mV typ). The low dropout voltage allows for more
utilization of a battery’s available energy by operating
closer to its end-of-life voltage. The LP3982's PMOS
output transistor consumes relatively no drive current
compared to PNP LDO regulators.
This PMOS regulator is stable with small ceramic
capacitive loads (2.2 μF typ).
These devices also include regulation fault detection,
a bandgap voltage reference, constant current limiting
and thermal overload protection.
Application Circuit
V_IN
2.22F
V_O
IN
OUT
100k
2.22F
CERAMIC
SHDN FAULT
GND ^CC
33n
F
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2013, Texas Instruments Incorporated