LMC6082IMX Datasheet, PDF (1/22 Pages) Texas Instruments – LMC6082 Precision CMOS Dual Operational Amplifier

LMC6082
www.ti.com
SNOS630D – AUGUST 2000 – REVISED MARCH 2013
LMC6082 Precision CMOS Dual Operational Amplifier
Check for Samples: LMC6082
FEATURES
1
•2 (Typical Unless Otherwise Stated)
• Low Offset Voltage: 150 μV
• Operates from 4.5V to 15V Single Supply
• Ultra Low Input Bias Current: 10 fA
• Output Swing to Within 20 mV of Supply Rail,
100k Load
• Input Common-Mode Range Includes V^−
• High Voltage Gain: 130 dB
• Improved Latchup Immunity
APPLICATIONS
• Instrumentation Amplifier
• Photodiode and Infrared Detector Preamplifier
• Transducer Amplifiers
• Medical Instrumentation
• D/A Converter
• Charge Amplifier for Piezoelectric Transducers
DESCRIPTION
The LMC6082 is a precision dual low offset voltage
operational amplifier, capable of single supply
operation. Performance characteristics include ultra
low input bias current, high voltage gain, rail-to-rail
output swing, and an input common mode voltage
range that includes ground. These features, plus its
low offset voltage, make the LMC6082 ideally suited
for precision circuit applications.
Other applications using the LMC6082 include
precision full-wave rectifiers, integrators, references,
and sample-and-hold circuits.
This device is built with TI's advanced Double-Poly
Silicon-Gate CMOS process.
For designs with more critical power demands, see
the LMC6062 precision dual micropower operational
amplifier.
PATENT PENDING
Connection Diagram
Figure 1. 8-Pin PDIP/SOIC
Top View
Figure 2. Input Bias Current vs Temperature
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated