LM34910_15 Datasheet, PDF (1/18 Pages) Texas Instruments – High Voltage (40V, 1.25A) Step Down Switching Regulator

LM34910
www.ti.com
SNVS297B – OCTOBER 2004 – REVISED MARCH 2013
LM34910 High Voltage (40V, 1.25A) Step Down Switching Regulator
Check for Samples: LM34910
FEATURES
1
•2 Integrated 40V, N-Channel Buck Switch
• Integrated Start-Up Regulator
• Input Voltage Range: 8V to 36V
• No Loop Compensation Required
• Ultra-Fast Transient Response
• Operating Frequency Remains Constant with
Load Current and Input Voltage
• Maximum Duty Cycle Limited During Start-Up
• Adjustable Output Voltage
• Valley Current Limit At 1.25A
• Precision Internal Reference
• Low Bias Current
• Highly Efficient Operation
• Thermal Shutdown
TYPICAL APPLICATIONS
• High Efficiency Point-Of-Load (POL) Regulator
• Non-Isolated Telecommunication Buck
Regulator
• Secondary High Voltage Post Regulator
DESCRIPTION
The LM34910 Step Down Switching Regulator
features all of the functions needed to implement a
low cost, efficient, buck bias regulator capable of
supplying 1.25A to the load. This buck regulator
contains a 40V N-Channel Buck Switch, and is
available in the thermally enhanced WSON-10
package. The hysteretic regulation scheme requires
no loop compensation, results in fast load transient
response, and simplifies circuit implementation. The
operating frequency remains constant with line and
load variations due to the inverse relationship
between the input voltage and the on-time. The
current limit detection is set at 1.25A. Additional
features include: VCC under-voltage lockout, thermal
shutdown, gate drive under-voltage lockout, and
maximum duty cycle limiter.
Package
• WSON-10 (4 mm x 4 mm)
• Exposed Thermal Pad For
Dissipation
Improved
Heat
Connection Diagram
SW
1
BST
2
ISEN
3
SGND
4
RTN
5
10
VIN
9
VCC
8
RON/SD
7
SS
6
FB
Figure 1. 10-Lead WSON
See DPR0010A Package
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated