English
Language : 

DS90LV031ATM-NOPB Datasheet, PDF (1/19 Pages) Texas Instruments – DS90LV031A 3V LVDS Quad CMOS Differential Line Driver
DS90LV031A
www.ti.com
SNLS020C – JULY 1999 – REVISED APRIL 2013
DS90LV031A 3V LVDS Quad CMOS Differential Line Driver
Check for Samples: DS90LV031A
FEATURES
1
•23 >400 Mbps (200 MHz) switching rates
• 0.1 ns typical differential skew
• 0.4 ns maximum differential skew
• 2.0 ns maximum propagation delay
• 3.3V power supply design
• ±350 mV differential signaling
• Low power dissipation (13mW at 3.3V static)
• Interoperable with existing 5V LVDS devices
• Compatible with IEEE 1596.3 SCI LVDS
standard
• Compatible with TIA/EIA-644 LVDS standard
• Industrial operating temperature range
• Available in SOIC and TSSOP surface mount
packaging
DESCRIPTION
The DS90LV031A is a quad CMOS differential line
driver designed for applications requiring ultra low
power dissipation and high data rates. The device is
designed to support data rates in excess of 400 Mbps
(200 MHz) utilizing Low Voltage Differential Signaling
(LVDS) technology.
The DS90LV031A accepts low voltage
LVTTL/LVCMOS input levels and translates them to
low voltage (350 mV) differential output signals. In
addition the driver supports a TRI-STATE® function
that may be used to disable the output stage,
disabling the load current, and thus dropping the
device to an ultra low idle power state of 13 mW
typical.
The EN and EN* inputs allow active Low or active
High control of the TRI-STATE outputs. The enables
are common to all four drivers. The DS90LV031A and
companion line receiver (DS90LV032A) provide a
new alternative to high power psuedo-ECL devices
for high speed point-to-point interface applications.
Connection Diagram
Figure 1. Dual-In-Line
See Package Number D (R-PDSO-G16) or
PW (R-PDSO-G16)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TRI-STATE is a registered trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated