DRV8832-Q1_15 Datasheet, PDF (1/18 Pages) Texas Instruments – LOW-VOLTAGE MOTOR DRIVER IC

DRV8832-Q1
www.ti.com
SLVSBW9B – APRIL 2013 – REVISED JANUARY 2014
LOW-VOLTAGE MOTOR DRIVER IC
Check for Samples: DRV8832-Q1
FEATURES
1
•2 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following
Results:
– Device Temperature Grade 1: -40°C to
125°C Ambient Operating Temperature
Range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• H-Bridge Voltage-Controlled Motor Driver
– Drives DC Motor, One Winding of a Stepper
Motor, or Other Actuators/Loads
– Efficient PWM Voltage Control for Constant
Motor Speed With Varying Supply Voltages
– Low MOSFET On-Resistance:
HS + LS 450 mΩ
• 1-A Maximum DC/RMS or Peak Drive Current
• 2.75-V to 6.8-V Operating Supply Voltage
Range
• 300-nA (Typical) Sleep Mode Current
• Reference Voltage Output
• Current Limit Circuit
• Fault Output
• Thermally Enhanced Surface Mount Packages
APPLICATIONS
• Battery-Powered:
– Printers
– Toys
– Robotics
– Cameras
– Phones
• Small Actuators, Pumps, etc.
DESCRIPTION
The DRV8832-Q1 provides an integrated motor driver solution for battery-powered toys, printers, and other low-
voltage or battery-powered motion control applications. The device has one H-bridge driver, and can drive one
DC motor or one winding of a stepper motor, as well as other loads like solenoids. The output driver block
consists of N-channel and P-channel power MOSFET’s configured as an H-bridge to drive the motor winding.
Provided with sufficient PCB heatsinking, the DRV8832-Q1 can supply up to 1-A of DC/RMS or peak output
current. It operates on power supply voltages from 2.75 V to 6.8 V.
To maintain constant motor speed over varying battery voltages while maintaining long battery life, a PWM
voltage regulation method is provided. An input pin allows programming of the regulated voltage. A built-in
voltage reference output is also provided.
Internal protection functions are provided for over current protection, short circuit protection, under voltage
lockout and overtemperature protection.
The DRV8832-Q1 also provides a current limit function to regulate the motor current during conditions like motor
startup or stall, as well as a fault output pin to signal a host processor of a fault condition.
The DRV8832-Q1 is available in tiny 3-mm x 3-mm 10-pin MSOP package with PowerPAD™ (Eco-friendly:
RoHS & no Sb/Br).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013–2014, Texas Instruments Incorporated